Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2
|
作者：
Sanchez, Y. [1 ]
Trujillo, F. J. [1 ]
Sevilla, L. [1 ]
Marcos, M. [2 ]
机构：
[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain
[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain
来源：
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷
关键词：
Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;
D O I：
10.1016/j.proeng.2015.12.527
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：513 / 520
页数：8
相关论文
共 50 条
  • [1] Influence of Tool Wear on Form Deviations in Dry Machining of UNS A97075 Alloy
    Trujillo Vilches, Francisco Javier
    Martin Bejar, Sergio
    Bermudo Gamboa, Carolina
    Herrera Fernandez, Manuel
    Sevilla Hurtado, Lorenzo
    METALS, 2021, 11 (06)
  • [2] Parametric analysis of the Ultimate Tensile Strength in dry machining of UNS A97075 Alloy
    Bermudo, C.
    Trujillo, F. J.
    Herrera, M.
    Sevilla, L.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 81 - 88
  • [3] Tool Wear Mechanism in Cutting of Stack CFRP/UNS A97075
    Raul Fernandez-Vidal, Severo
    Fernandez-Vidal, Sergio
    Batista, Moises
    Salguero, Jorge
    MATERIALS, 2018, 11 (08)
  • [4] Fatigue Behavior Parametric Analysis of Dry Machined UNS A97075 Aluminum Alloy
    Martin Bejar, Sergio
    Trujillo Vilches, Francisco Javier
    Bermudo Gamboa, Carolina
    Sevilla Hurtado, Lorenzo
    METALS, 2020, 10 (05)
  • [5] Influence of the Axial Machining Length on Microgeometrical Deviations of Horizontally Dry-Turned UNS A97075 Al-Zn Alloy
    Trujillo, F. J.
    Sevilla, L.
    Marcos, M.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 405 - 412
  • [6] OPTIMIZATION OF ANN USED TO PREDICT THE SURFACE ROUGHNESS IN DRY TURNING OF UNS A97075 AERONAUTICAL ALUMINUM ALLOY
    Repiso-Lopez, Ignacio
    Martin-Bejar, Sergio
    Trujillo, Francisco Javier
    Sevilla, Lorenzo
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2023, 66 (05): : 317 - 326
  • [7] Parametric Analysis of Macro-Geometrical Deviations in Dry Turning of UNS A97075 (Al-Zn) Alloy
    Martin Bejar, Sergio
    Trujillo Vilches, Francisco Javier
    Bermudo Gamboa, Carolina
    Sevilla Hurtado, Lorenzo
    METALS, 2019, 9 (11)
  • [8] Experimental Parametric Model for Indirect Adhesion Wear Measurement in the Dry Turning of UNS A97075 (Al-Zn) Alloy
    Javier Trujillo, Francisco
    Sevilla, Lorenzo
    Marcos, Mariano
    MATERIALS, 2017, 10 (02)
  • [9] Cutting Speed and Feed Influence on Surface Microhardness of Dry-Turned UNS A97075-T6 Alloy
    Martin-Bejar, Sergio
    Trujillo Vilches, Francisco Javier
    Bermudo Gamboa, Carolina
    Sevilla Hurtado, Lorenzo
    APPLIED SCIENCES-BASEL, 2020, 10 (03):
  • [10] Investigation of chip-back temperature during machining depending on cutting parameters
    Korkut, Ihsan
    Boy, Mehmet
    Karacan, Ismail
    Seker, Ulvi
    MATERIALS & DESIGN, 2007, 28 (08) : 2329 - 2335
12345