Effect of natural fibers reinforcement on lap-shear strength of adhesive bonded joints

被引：1
|
作者：
Udatha, Pavani [1 ]
Babu, Y. Naidu [1 ]
Satyadev, M. [1 ]
Bhagavathi, Lakshmana Rao [1 ]
机构：
[1] RGUKT Nuzvid, Dept Mech Engn, Nuzvid 521202, Andhra Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 23卷
关键词：
Banana fibers; Flax; Sisal; Lap-shear joint; Epoxy; CARBON NANOTUBES; EPOXY;
D O I：
10.1016/j.matpr.2019.05.403
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present work, epoxy matrix with natural fibers (Banana, Flax, Sisal) were used to join the two adherends. A FEM based model was developed to simulate the epoxy + fiber composite lap-shear joints. The lap-shear joints with different volume fractions of the fibers were modelled using ANSYS software. The results suggested that the maximum shear stress increased with increase in fiber volume fraction whereas the minimum shear stress decreased with increase in fiber volume fraction. It is observed that the maximum shear stress of flax reinforced joints is higher than the banana and sisal reinforced epoxy joints. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：541 / 544
页数：4
相关论文
共 50 条
  • [31] Quasi-static and Dynamic Lap Shear Strength of Aluminium Joints Bonded with Epoxy/Alumina Nanocomposite Adhesive
    Gupta, Sunil Kumar
    Shukla, Dharmendra Kumar
    JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS, 2020, 6 (02) : 186 - 196
  • [32] Modelling of deformation and failure of crash toughened adhesive bonded lap shear joints
    Lu, L.
    Zhao, H. Y.
    Cai, Z. P.
    Wang, P. C.
    Fickes, John
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (05) : 479 - 483
  • [33] Ductility effect on clinching joint strength in lap-shear configuration loading
    Kumar, Santosh
    Avinash, G.
    Vimal, E.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1667 - 1672
  • [34] Effect of adhesive type and thickness on the lap shear strength
    da Silva, Lucas F.M.
    Rodrigues, T.N.S.S.
    Figueiredo, M.A.V.
    de Moura, M.F.S.F.
    Chousal, J.A.G.
    Journal of Adhesion, 2006, 82 (11): : 1091 - 1115
  • [35] Effect of adhesive type and thickness on the lap shear strength
    da Silva, Lucas F. M.
    Rodrigues, T. N. S. S.
    Figueiredo, M. A. V.
    de Moura, M. F. S. F.
    Chousal, J. A. G.
    JOURNAL OF ADHESION, 2006, 82 (11): : 1091 - 1115
  • [36] Strength Of Single-Lap Adhesive-Bonded Metal Joints.
    Schlimmer, M.
    1600, (36):
  • [37] Effect of metal as part of fillet on the tensile shear strength of adhesively bonded single lap joints
    You, M
    Zheng, Y
    Zheng, XL
    Liu, WJ
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2003, 23 (05) : 365 - 369
  • [38] Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications
    Banea, M.D. (mbanea@fe.up.pt), 1600, Taylor and Francis Ltd. (28): : 14 - 15
  • [39] Effect of adhesive modulus on the performance of SMC lap shear joints
    Jialanella, Gary L.
    Shaffer II, Edward O.
    Journal of Adhesion Science and Technology, 1993, 7 (11): : 1171 - 1181
  • [40] Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications
    Banea, M. D.
    da Silva, L. F. M.
    Campilho, R. D. S. G.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2014, 28 (14-15) : 1367 - 1381
12345