The microstructure, creep resistance, and high-temperature mechanical properties of Mg-5Sn alloy with Ca and Sb additions, and aging treatment

被引：65
作者：
Nayyeri, G. [1 ]
Mahmudi, R. [1 ]
Salehi, F. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Tehran, Iran
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2010年 / 527卷 / 21-22期
关键词：
Mg-Sn-Ca alloy; Mg-Sn-Sb alloy; Impression creep; Shear punch testing; AGE-HARDENING RESPONSE; SN; BEHAVIOR; TENSILE;
D O I：
10.1016/j.msea.2010.05.040
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The microstructure, creep resistance, and high-temperature shear strength of the Mg-5Sn, Mg-5Sn-1.4Ca, and Mg-5Sn-0.4Sb alloys were studied in the as-cast and aged conditions. Impression creep tests were performed at 150 and 200 degrees C and under punching stresses in the range 250-500 MPa. The shear yield stress (SYS) and ultimate shear strength (USS) were measured by the shear punch test (SPT) in the temperature range 25-250 degrees C. The results showed that creep resistance and shear strength of the base alloy were significantly enhanced with the addition of Sb and Ca. This was attributed to the concurrent formation of Mg2Sn particles with the more thermally stable CaMgSn or Mg3Sb2 phases which strengthen both matrix and grain boundaries during deformation in the investigated system. Furthermore, mechanical properties and creep resistance of the aged alloys were much better than those of the as-cast materials, due to the higher volume fraction of Mg2Sn, Mg3Sb2, and CaMgSn precipitates distributed homogeneously in the microstructure of the aged materials. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：5353 / 5359
页数：7
相关论文
共 24 条
[1]  
Abu Leil T, 2007, MATER SCI FORUM, V546-549, P69, DOI 10.4028/www.scientific.net/MSF.546-549.69
[2]   Finite element analysis of a shear punch test [J].
Guduru, R. K. ;
Nagasekhar, A. V. ;
Scattergood, R. O. ;
Koch, C. C. ;
Murty, K. L. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (05) :1477-1483
[3]   Evaluation of mechanical properties using shear-punch testing [J].
Guduru, RK ;
Darling, KA ;
Kishore, R ;
Scattergood, RO ;
Koch, CC ;
Murty, KL .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2) :307-314
[4]   An investigation into the origin and nature of the slope and x-axis intercept of the shear punch-tensile yield strength correlation using finite element analysis [J].
Hankin, GL ;
Toloczko, MB ;
Johnson, KI ;
Khaleel, MA ;
Hamilton, ML ;
Garner, FA ;
Davies, RW ;
Faulkner, RG .
EFFECTS OF RADIATION ON MATERIALS: 19TH INTERNATIONAL SYMPOSIUM, 2000, 1366 :1018-1028
[5]   Intermetallics in magnesium alloys [J].
Hort, N ;
Huang, YD ;
Kainer, KU .
ADVANCED ENGINEERING MATERIALS, 2006, 8 (04) :235-240
[6]   Microstructural investigations of the Mg-Sn-xCa system [J].
Hort, Norbert ;
Huang, Ybanding ;
Abu Leil, Torek ;
Maier, Petra ;
Kainer, Karl Ulrich .
ADVANCED ENGINEERING MATERIALS, 2006, 8 (05) :359-364
[7]   Impression Creep Behavior of a Cast AZ91 Magnesium Alloy [J].
Kabirian, F. ;
Mahmudi, R. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (01) :116-127
[8]   Effects of Rare Earth Element Additions on the Impression Creep Behavior of AZ91 Magnesium Alloy [J].
Kabirian, F. ;
Mahmudi, R. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (09) :2190-2201
[9]   The Effect of Microstructure Evolution on the Elevated Temperature Mechanical Properties in Mg-Sn-Ca System [J].
Kim, Do Hyung ;
Lee, Ju Youn ;
Lim, Hyun Kyu ;
Kyeong, Joon Seok ;
Kim, Won Tae ;
Kim, Do Hyang .
MATERIALS TRANSACTIONS, 2008, 49 (10) :2405-2413
[10]   Effect of Ca additions on the microstructure, thermal stability and mechanical properties of a cast AM60 magnesium alloy [J].
Kondori, B. ;
Mahmudi, R. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (7-8) :2014-2021
123