Toughening and strengthening of Nb2O5 doped zirconia/alumina (ZTA) composites

被引:50
|
作者
Hassan, A. M. [1 ]
Naga, S. M. [2 ]
Awaad, M. [2 ]
机构
[1] Zagazig Univ, Fac Engn, Dept Mat Engn, Zagazig 44519, Egypt
[2] Natl Res Ctr, Dept Ceram, Cairo 12622, Egypt
关键词
ZTA; Niobia; Microstructure; Mechanical properties; X-RAY-ABSORPTION; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; ALUMINA; MICROSTRUCTURE; YTTRIA; TRANSFORMATION; STABILIZATION; DENSIFICATION; CONDUCTIVITY;
D O I
10.1016/j.ijrmhm.2014.10.006
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The aim of this research is to investigate the characteristics and mechanical properties of Nb2O5 doped zirconia-toughened-alumina composites. Samples of partially stabilized-zirconia toughened alumina (ZTA) with the addition of 5 vol.% ZrO2 doped with Nb2O5 in amounts of 0.2, 0.4 and 0.6 vol.% were prepared by sol-gel technique. The powders of each composition were uniaxially pressed into discs and rectangular bars, and then pressureless sintered at 15000 up to 1650 degrees C for 1 h. The phase constitution and microstructures of the as sintered ceramic composites were characterized by using an X-ray diffractometer and a scanning electron microscope respectively. The mechanical properties of the ceramic composites were evaluated through Vickers hardness, flexural strength and fracture toughness tests. It was found that increasing the Nb2O5 concentration had a strong effect on the densification behavior, microstructure and mechanical properties of the ZTA composites. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:338 / 345
页数:8
相关论文
共 50 条
  • [11] Comparative study among Al2O3, ZTA, MgO/ZTA & CuO/ZTA composites in terms of Mechanical Properties
    Gokilakrishnan, G.
    Singh, Bipin Kumar
    Vigneshkumar, M.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2023, 24 (04): : 655 - 661
  • [12] The influence of in-situ formation of hibonite on the properties of zirconia toughened alumina (ZTA) composites
    Sktani, Zhwan Dilshad Ibrahim
    Azhar, Ahmad Zahirani Ahmad
    Ratnam, Mani Maran
    Ahmad, Zainal Arifin
    CERAMICS INTERNATIONAL, 2014, 40 (04) : 6211 - 6217
  • [13] Properties of 2 mol% Yttria Stabilized Zirconia-Alumina-Cerium Hexaaluminate Composites
    Kern, Frank
    CERAMICS-SWITZERLAND, 2020, 3 (02): : 190 - 198
  • [14] The relationship between microstructure and fracture toughness of zirconia toughened alumina (ZTA) added with MgO and CeO2
    Rejab, Nik Akmar
    Azhar, Ahmad Zahirani Ahmad
    Ratnam, Mani Maran
    Ahmad, Zainal Arifin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 41 : 522 - 530
  • [15] Effect of Ta2O5 addition on the microstructure and mechanical properties of TiO2-added yttria-stabilized zirconia-toughened alumina (ZTA) composites
    Sui, Yudong
    Han, Lina
    Jiang, Yehua
    CERAMICS INTERNATIONAL, 2018, 44 (12) : 14811 - 14816
  • [16] Influence of CeO2 addition on the microstructure and mechanical properties of Zirconia-toughened alumina (ZTA) composite prepared by spark plasma sintering
    Tan, Pan
    Yang, Yi
    Sui, Yudong
    Jiang, Yehua
    CERAMICS INTERNATIONAL, 2020, 46 (06) : 7510 - 7516
  • [17] Microwave sintering and mechanical properties of La2O3/Nb2O5 toughened Al2O3 ceramics
    Liu, Jin
    Liang, Bingliang
    Ai, Yunlong
    Zhang, Jianjun
    He, Fei
    He, Wen
    Liu, Zhiyong
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2021, 22 (03): : 296 - 300
  • [18] Fabrication and Mechanical Properties of Al2O3/TiAl in Situ Composites Doped With Nb2O5
    Wang, F.
    Fan, N.
    Zhu, J.
    Jiang, H.
    SCIENCE OF SINTERING, 2015, 47 (03) : 311 - 317
  • [19] Study of Cu-doped zirconia toughened alumina ceramics (Cu-ZTA) subject to lubrication behaviors for arthroplasty
    Li, Y. X.
    Gong, Y. L.
    Li, Q.
    Xiang, Y.
    Li, S.
    Leng, Y. X.
    CERAMICS INTERNATIONAL, 2024, 50 (17) : 31691 - 31699
  • [20] Effect of Nb2O5 on the microstructure and mechanical properties of TiAl based composites produced by hot pressing
    Zhu, Jianfeng
    Yang, Wenwen
    Yang, Haibo
    Wang, Fen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (21): : 6642 - 6646