Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless steels

被引:98
作者
Chen, Lindou [1 ]
Tan, Hua [1 ]
Wang, Zhiyu [2 ]
Li, Jin [1 ]
Jiang, Yiming [1 ]
机构
[1] Fudan Univ, Dept Mat Sci, Shanghai 200433, Peoples R China
[2] Baosteel Co Ltd, Ctr Res & Dev, Shanghai 201900, Peoples R China
基金
美国国家科学基金会;
关键词
Stainless steel; Potentiostatic; Thermal cycling; Pitting corrosion; Welding; SIGMA-PHASE PRECIPITATION; MECHANICAL-PROPERTIES; AUSTENITE REFORMATION; SECONDARY AUSTENITE; LOCALIZED CORROSION; TEMPERATURE; NITROGEN; BEHAVIOR; DEPENDENCE; TOUGHNESS;
D O I
10.1016/j.corsci.2012.01.018
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Pitting corrosion resistance of 2304 duplex stainless steel heat-affected zone with different cooling rates has been studied by potentiostatic critical pitting temperature (CPT) in 1.0 M NaCl. The results showed that, as cooling rate decreased from 100 to 10 degrees C/s in the temperature range of 1350-800 degrees C, the austenite fraction increased from 27.8% to 35.7%, and the CPT value increased from 14 to 19 degrees C. The morphologies after the CPT tests showed pitting occurred preferentially in the ferrite phase for all specimens. Moreover, relationship between pitting corrosion resistance and microstructure evolution was further discussed. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:168 / 174
页数:7
相关论文
共 50 条
  • [41] Effect of welding variables on cooling rate and pitting corrosion resistance in super duplex stainless weldments
    Wang, HS
    MATERIALS TRANSACTIONS, 2005, 46 (03) : 593 - 601
  • [42] Structure and properties of the heat-affected zone of duplex steels welded joints
    Nowacki, J
    Lukojc, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 164 : 1074 - 1081
  • [43] Unlocking the influence of microstructural evolution on hardness and pitting corrosion in duplex stainless welded joints
    Shen, Kuiling
    Jiang, Wenchun
    Sun, Chong
    Zhao, Weimin
    Sun, Jianbo
    CORROSION SCIENCE, 2022, 206
  • [44] Microstructural and Electrochemical Analysis of the Physically Simulated Heat-Affected Zone of Super-Duplex Stainless Steel UNS S32750
    dos Santos Jr, Francisco Magalhaes
    da Silva, Leonardo Oliveira Passos
    dos Santos, Ygor Tadeu Bispo
    Callegari, Bruna
    Lima, Tiago Nunes
    Coelho, Rodrigo Santiago
    METALS, 2025, 15 (01)
  • [45] Austenite reformation in the heat-affected zone of duplex stainless steel 2205
    Sieurin, H
    Sandström, R
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2): : 250 - 256
  • [46] Effect of Welding Current on Corrosion Resistance of Heat-Affected Zones of HDR Duplex Stainless Steel
    Liu, Xin
    Hu, Yulong
    Liu, Nian
    MATERIALS, 2024, 17 (09)
  • [47] Microstructural characteristics of different heat-affected zones in welded joints of UNS S32304 duplex stainless steel using the GMAW process: analysis of the pitting corrosion resistance
    Morales, Eduardo V.
    Cruz-Crespo, Amado
    Pozo-Morejon, Juan A.
    Oria, Jorge V. M.
    Araujo, Leonardo S.
    Bott, Ivani S.
    CORROSION REVIEWS, 2024, 42 (01) : 93 - 105
  • [48] An Overview on Additive Manufacturing of Duplex Stainless Steels: Microstructure, Mechanical Properties, Corrosion Resistance, Postheat Treatment, and Future Perspectives
    Karunanithi, Sanjeevi Prakash
    Arasappan, Rajesh Kannan
    Nallathambi, Siva Shanmugam
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (12)
  • [49] Effects of Isothermal Aging on the Microstructure Evolution and Pitting Corrosion Resistance of Lean Duplex Stainless Steel UNS S32003
    He, Liang
    Wirian, Lovelyn
    Singh, Preet M.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (05): : 2103 - 2113
  • [50] Effect of microstructure and passive film on corrosion resistance of 2507 super duplex stainless steel prepared by different cooling methods in simulated marine environment
    Zhu, Min
    Zhang, Qiang
    Yuan, Yong-feng
    Guo, Shao-yi
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2020, 27 (08) : 1100 - 1114