Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless steels

被引:100
作者
Chen, Lindou [1 ]
Tan, Hua [1 ]
Wang, Zhiyu [2 ]
Li, Jin [1 ]
Jiang, Yiming [1 ]
机构
[1] Fudan Univ, Dept Mat Sci, Shanghai 200433, Peoples R China
[2] Baosteel Co Ltd, Ctr Res & Dev, Shanghai 201900, Peoples R China
基金
美国国家科学基金会;
关键词
Stainless steel; Potentiostatic; Thermal cycling; Pitting corrosion; Welding; SIGMA-PHASE PRECIPITATION; MECHANICAL-PROPERTIES; AUSTENITE REFORMATION; SECONDARY AUSTENITE; LOCALIZED CORROSION; TEMPERATURE; NITROGEN; BEHAVIOR; DEPENDENCE; TOUGHNESS;
D O I
10.1016/j.corsci.2012.01.018
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Pitting corrosion resistance of 2304 duplex stainless steel heat-affected zone with different cooling rates has been studied by potentiostatic critical pitting temperature (CPT) in 1.0 M NaCl. The results showed that, as cooling rate decreased from 100 to 10 degrees C/s in the temperature range of 1350-800 degrees C, the austenite fraction increased from 27.8% to 35.7%, and the CPT value increased from 14 to 19 degrees C. The morphologies after the CPT tests showed pitting occurred preferentially in the ferrite phase for all specimens. Moreover, relationship between pitting corrosion resistance and microstructure evolution was further discussed. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:168 / 174
页数:7
相关论文
共 38 条
[1]   Effect of solution treatment temperature on the precipitation kinetic of σ-phase in 2205 duplex stainless steel welds [J].
Badji, R. ;
Bouabdallah, M. ;
Bacroix, B. ;
Kahloun, C. ;
Bettahar, K. ;
Kherrouba, N. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2) :447-454
[2]   Laser welding and surface treatment of a 22Cr-5M-3Mo duplex stainless steel [J].
Capello, E ;
Chiarello, P ;
Previtali, B ;
Vedani, M .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 351 (1-2) :334-343
[3]  
CHARLES J, 1991, DUPLEX STAINLESS STE, P3
[4]   Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel [J].
Chen, TH ;
Yang, JR .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 338 (1-2) :166-181
[5]   Effects of solution treatment and continuous cooling on σ-phase precipitation in a 2205 duplex stainless steel [J].
Chen, TH ;
Yang, JR .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 311 (1-2) :28-41
[6]   Cooling rate effect on vacuum brazed joint properties for 2205 duplex stainless steels [J].
Chiu, LH ;
Hsieh, WC ;
Wu, CH .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 354 (1-2) :82-91
[7]   Dependence of critical pitting temperature on the concentration of sulphate ion in chloride-containing solutions [J].
Deng, Bo ;
Jiang, Yiming ;
Liao, Jiaxing ;
Hao, Yunwei ;
Zhong, Cheng ;
Li, Jin .
APPLIED SURFACE SCIENCE, 2007, 253 (18) :7369-7375
[8]   Effect of thermal cycles on the corrosion and mechanical properties of UNS S31803 duplex stainless steel [J].
Deng, Bo ;
Wang, Zhiyu ;
Jiang, Yiming ;
Sun, Tao ;
Xu, Juliang ;
Li, Jin .
CORROSION SCIENCE, 2009, 51 (12) :2969-2975
[9]   Evaluation of localized corrosion in duplex stainless steel aged at 850°C with critical pitting temperature measurement [J].
Deng, Bo ;
Wang, Zhiyu ;
Jiang, Yiming ;
Wang, Hao ;
Gao, Juan ;
Li, Jin .
ELECTROCHIMICA ACTA, 2009, 54 (10) :2790-2794
[10]   Pit growth studies in stainless steel foils. I. Introduction and pit growth kinetics [J].
Ernst, P ;
Newman, RC .
CORROSION SCIENCE, 2002, 44 (05) :927-941