Calculations of gas thermal radiation transfer in one-dimensional planar enclosure using LBL and SNB models

Thermal radiation transfer in one-dimensional enclosure between two parallel plates filled with real gases, namely CO2, H2O, or their mixtures, was calculated using the line-by-line approach and the statistical narrow-band model. Line-by-line calculations were carried out using the HITEMP1995, HITRAN2004, HITRAN2008, HITEMP2010, and updated CDSD-1000 databases. This study demonstrates the importance of spectral database to the accuracy of line-by-line calculations through a systematic comparison of line-by-line results using different databases. Calculations of the statistical narrow-band model were conducted using the EM2C narrow-band database. The strong dependence of line-by-line results on the spectral database was demonstrated through several gas radiation transfer problems in planar-plate enclosure containing real gases of both isothermal or non-isothermal and uniform or non-uniform concentrations at 1 atm. Fairly significant differences were found between the line-by-line results using the HITEMP2010 database and those using older databases. Very good agreement in both the wall heat flux and the radiative source term was observed between the line-by-line results using the HITEMP2010 database and the results of the statistical narrow-band model in all the cases tested, confirming the EM2C narrow-band parameters for both H2O and CO2 are accurate. For cases involving CO2 the line-by-line results using the HITEMP2010 database are in excellent agreement with those using the updated CDSD-1000 databases. The line-by-line results based on the HITEMP2010 database should be used as benchmark solutions to evaluate the accuracy of other approximate models. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.