Deformation modes of the superplastic Al-10wt%Ti alloy at high strain-rates

被引：0

作者：

Kum, DW ^{[1
]}

Kim, HS ^{[1
]}

Kim, WT ^{[1
]}

Suh, SH ^{[1
]}

机构：

[1] Korea Inst Sci & Technol, Seoul 136130, South Korea

来源：

JOHANNES WEERTMAN SYMPOSIUM | 1996年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Gas-atomized powders of Al-10wt%Ti alloy were consolidated by a powder metallurgy process involving hot extrusion. A microstructure of micron-size aluminum grains and fine flake-shaped Al3Ti particles was obtained. The fine-grained Al-10wt%Ti alloy showed unusually high ductility and high strain-rate sensitivity at strain rate of 10(-1) sec(-1) and at temperatures above 600 degrees C. This high strain-rate superplasticity(HSRS) is correlated with those of PM processed aluminum alloys and whisker-reinforced aluminum composites based on the microstructural similarities. The observed flow stress vs. strain rate was analysed by an empirical equation incorporating threshold stress with the stress exponent of 2 and the activation energy of lattice diffusion of Al(i.e., 140kJ/mole). Grain boundary sliding accomodated by dislocation slip is considered as the governing mechanism for the HSRS, and it is interpreted as an extension of fine grain superplasticity. Because liquid phase does not appear in the binary Al-Ti system at the tested temperatures, requirement for incipient melting for HSRS is questioned.

引用

页码：135 / 140

页数：6

共 17 条

[11] SUPERPLASTIC BEHAVIOR OF AN AL-4WT-PERCENT-TI ALLOY PROCESSED BY THE POWDER-METALLURGY ROUTE
MURTY, GS
KOCZAK, MJ
[J]. MATERIALS SCIENCE AND ENGINEERING, 1988, 100 : 37 - 43
[12] EXTENDED DUCTILITY AT HIGH-STRAIN RATES IN A MECHANICALLY ALLOYED ALUMINUM-ALLOY
NIEH, TG
GILMAN, PS
WADSWORTH, J
[J]. SCRIPTA METALLURGICA, 1985, 19 (11): : 1375 - 1378
[13] HIGH-STRAIN-RATE SUPERPLASTICITY IN ALUMINUM MATRIX COMPOSITES
NIEH, TG
WADSWORTH, J
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 147 (02): : 129 - 142
[14] NIEH TG, 1991, SUPERPLASTICITY ADV, P339
[15] SCHELLING RD, 1989, JOM JAN, P32
[16] SHERBY OD, 1994, MATER SCI FORUM, V170-, P13, DOI 10.4028/www.scientific.net/MSF.170-172.13
[17] SHERBY OD, 1984, DEFORMATION PROCESSI, P355

← 1 2 →