THREE-DIMENSIONAL NUMERICAL ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A CURVED SQUARE DUCT

被引：0

作者：

Onur, Nevzat ^{[1
]}

Turgut, Oguz ^{[1
]}

Arslan, Kamil ^{[1
]}

机构：

[1] Gazi Univ, Fac Engn, Dept Mech Engn, TR-06570 Ankara, Turkey

来源：

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY | 2011年 / 31卷 / 02期

关键词：

Laminar flow; Curved square duct; Forced convection; Heat transfer; Ansys Fluent; LAMINAR-FLOW;

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A three-dimensional numerical study of a constant property Newtonian fluid in 90 degrees strongly curved duct having a constant square cross section under steady and laminar flow conditions is presented for a uniform wall temperature boundary condition. Numerical solutions were obtained using commercial software Ansys Fluent 6.3.26 for the range of 165 <= De <= 1450 (250 <= Re <= 2200). The working fluid was air (Pr congruent to 0.7). The average Nusselt numbers and average Darcy friction factors are obtained, which can be used in estimation of flow and heat transfer performance in curved duct. In addition, local Nusselt numbers, local Darcy friction factors, velocity magnitude and temperature profiles, and secondary velocities are analyzed. Results are compared with the literature for validation of the numerical approach. It is seen that present results are in good agreement with the literature results.

引用

页码：13 / 24

页数：12

共 50 条

[41] EFFECTS OF ROTATION ON UNSTEADY FLUID FLOW AND FORCED CONVECTION IN THE ROTATING CURVED SQUARE DUCT WITH A SMALL CURVATURE
Hasan, Mohammad Sanjeed
Chanda, Ratan Kumar
Mondal, Rabindra Nath
Lorenzini, Giulio
FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, 2022, 20 (02) : 255 - 278
[42] Forced Convection Heat Transfer in Square Duct with Heated and Adiabatic Walls at Constant Axial Heat Flux
Zukowski, Miroslaw
COMPUTATIONAL TECHNOLOGIES IN ENGINEERING (TKI'2018), 2019, 2078
[43] DIMENSIONLESS GROUPS FOR LAMINAR DUCT FLOW FORCED CONVECTION HEAT-TRANSFER
SHAH, RK
LONDON, AL
MECHANICAL ENGINEERING, 1973, 95 (06) : 61 - 61
[44] THREE-DIMENSIONAL MIXED CONVECTION HEAT AND MASS TRANSFER IN A RECTANGULAR DUCT: CASE OF LONGITUDINAL ROLLS
Rahli, O.
Bennacer, R.
Bouhadef, K.
Ameziani, D. E.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2011, 59 (05) : 349 - 371
[45] Influence of a Magnetic Obstacle on Forced Convection in a Three-Dimensional Duct With a Circular Cylinder
Zhang, Xidong
Huang, Hulin
Zhang, Yin
Wang, Hongyan
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2016, 138 (01):
[46] Numerical analysis on forced convection heat transfer in pressurized HeII
Okamura, T
Saeki, M
Shiotsu, M
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2004, 14 (02) : 1758 - 1761
[47] Turbulent Flow in Forced Convection Heat Transfer-Numerical Validation
Santhosh N.
Harish H.V.
Sunil G.S.
Manjunath N.
Manjunath K.
Gowda A.C.
Huddar V.B.
International Journal of Vehicle Structures and Systems, 2022, 14 (01) : 18 - 21
[48] Numerical Analysis of Transfer of Heat by Forced Convection in a Wavy Channel
Madlool, Naseer Abboodi
Alshukri, Mohammed J.
Alsabery, Ammar I.
Eidan, Adel A.
Hashim, Ishak
INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED, 2023, 12 (01): : 155 - 165
[49] THREE-DIMENSIONAL NUMERICAL LAMINAR CONVECTION HEAT TRANSFER AROUND LATERAL PERFORATED FINS
Yaghoubi, M.
Shaeri, M. R.
Jafarpur, K.
COMPUTATIONAL THERMAL SCIENCES, 2009, 1 (03): : 323 - 340
[50] Three－Dimensional　Numerical　Simulation　of　Natural　Convection　Heat　Transfer　in　an　Inclined　Cylindrical　Annulus
J.G. wei
W.Q. Tao (School of Energy and Power Engineering
Journal of Thermal Science, 1996, (03) : 175 - 183

← 1 2 3 4 5 →