Wideband 3D-printed dielectric reflectarray in Ka-band

被引：4
|
作者：
Guo, Liwei [1 ]
Li, Simin [1 ,2 ]
Liao, Xin [1 ]
Jiang, Xing [1 ]
Peng, Lin [1 ]
机构：
[1] Guilin Univ Elect Technol, Guilin 541004, Peoples R China
[2] Guangxi Univ Sci & Technol, Liuzhou, Peoples R China
来源：
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS | 2022年 / 64卷 / 04期
基金：
中国国家自然科学基金;
关键词：
3D-printed; dielectric reflectarray antenna; Ka-band; wideband; ANTENNA; DESIGN;
D O I：
10.1002/mop.33170
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
An ultra-wideband 3D-printed dielectric reflectarray antenna (DRA) is proposed in this letter. The dielectric reflectarray unit (DRU) adopts the photosensitive resin therm1220, which dielectric constant of 3.97 is conducive to improving the bandwidth. Through adjusting the size of the DRU, the reflection phase can be adjusted. The dielectric reflectarray is 23 x 23 element which printed by stereo lithography apparatus (SLA) and is realized by installing a metal plate with four resin screws. The measured of the gain covers 25.8-28.9 dBi from 27.5 to 38 GHz. And the 3-dB gain bandwidth of measured is 32.1%. The measured aperture efficiency is basically above 30% from 28 to 35 GHz. The maximum gain is 28.1 dBi at 30 GHz, and the aperture efficiency is 39% during measurement. The 3 dB beam width of the E-plane and H-plane are both about 5.4 degrees in Ka-band. A good agreement can be observed between measurement and simulation.
引用
收藏
页码：762 / 769
页数：8
相关论文
共 50 条
  • [1] Three-Dimensional-Printed Wideband Perforated Dielectric-Only Reflectarray in Ka-Band
    Massaccesi, Andrea
    Bertana, Valentina
    Beccaria, Michele
    Marasso, Simone Luigi
    Cocuzza, Matteo
    Dassano, Gianluca
    Pirinoli, Paola
    IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2023, 71 (10) : 7848 - 7859
  • [2] 3D-printed reflector antenna and metallization in Ka-band
    Guo, Liwei
    Li, Simin
    Jiang, Xing
    Liao, Xin
    Zhang, Ying
    Shi, Bin
    INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2022, 32 (06)
  • [3] Perforated Dielectric Reflectarray in Ka-band
    Massaccesi, Andrea
    Beccaria, Michele
    Pirinoli, Paola
    IEEE ICCE 2020: 2020 IEEE EIGHTH INTERNATIONAL CONFERENCE ON COMMUNICATIONS AND ELECTRONICS (ICCE), 2021, : 193 - 196
  • [4] 3D-printed Ka-band Antenna Based on Stereolithography
    Silva, Joana S.
    Garcia-Vigueras, Maria
    Debogovic, Tomislav
    Mosig, Juan R.
    2017 11TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2017, : 589 - 593
  • [5] Ka-band Cavity Filter Manufactured in 3D-printed Alumina Technology
    Aquino, F.
    Tiradossi, D.
    Pelliccia, L.
    De Padova, A.
    Vitulli, F.
    Di Nardo, S.
    Deborgies, Francois
    2022 52ND EUROPEAN MICROWAVE CONFERENCE (EUMC), 2022, : 123 - 126
  • [6] Wideband 3D-Printed Dielectric Resonator Antennas
    Nayeri, Payam
    Brennecka, Geoff
    2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING, 2018, : 2081 - 2082
  • [7] Ka-Band 3-D-Printed Wideband Groove Gap Waveguide Orthomode Transducer
    Abdelaal, Mohamed A.
    Kishk, Ahmed A.
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2019, 67 (08) : 3361 - 3369
  • [8] A Ka-Band Cylindrical Paneled Reflectarray Antenna
    Greco, Francesco
    Boccia, Luigi
    Arnieri, Emilio
    Amendola, Giandomenico
    ELECTRONICS, 2019, 8 (06):
  • [9] 3D-printed wideband reflectarray antennas with mechanical beam-steering
    Massaccesi, Andrea
    Beccaria, Michele
    Bertana, Valentina
    Marasso, Simone Luigi
    Cocuzza, Matteo
    Dassano, Gianluca
    Pirinoli, Paola
    INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES, 2024, 16 (01) : 21 - 29
  • [10] A Ka-Band Reflectarray Antenna Integrated With Solar Cells
    An, Wenxing
    Xu, Shenheng
    Yang, Fan
    Gao, Jianfeng
    IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2014, 62 (11) : 5539 - 5546
12345