GBT-based buckling analysis of thin-walled members with non-standard support conditions

This paper reports on the use of a recently developed Generalised Beam Theory (GBT) formulation, and corresponding finite element implementation, to analyse the local and global buckling behaviour of thin-walled members with arbitrary loading and support conditions - this formulation takes into account longitudinal normal stress gradients and the ensuing pre-buckling shear stresses. After presenting an overview of the main concepts and procedures involved in the performance of a GBT-based (beam finite element) member buckling analysis, one addresses in detail the incorporation of non-standard support conditions, such as (i) full or partial localised displacement or rotation restraints, (ii) rigid or elastic intermediate supports or (iii) end supports corresponding to angle connections. In order to illustrate the application and capabilities of the proposed GBT-based approach, one presents and discusses numerical results concerning cold-formed steel (i) lipped channel beams and (ii) lipped I-section beams and columns with various "non-standard" support conditions - while the beams are acted by uniformly distributed or mid-span point loads, applied at the shear centre axis, the columns are subjected to uniform compression. In particular, it is possible to assess the influence of the different support conditions on the beam and column buckling behaviour (critical buckling loads and mode shapes). For validation purposes, most GBT-based results are compared with,values yielded by shell finite element analyses carried out in the code ANSYS.