Corrosion tests of nickel coatings prepared from a Watts-type bath

被引：35
|
作者：
Rusu, D. E. [1 ,2 ]
Ispas, A. [3 ]
Bund, A. [3 ]
Gheorghies, C. [1 ,2 ]
Carac, G. [1 ,2 ]
机构：
[1] Dunarea de Jos Univ Galati, Dept Phys, Galati 800008, Romania
[2] Dunarea de Jos Univ Galati, Dept Chem, Galati 800008, Romania
[3] Tech Univ Ilmenau, Fak Elektrotech & Informat Tech, D-98693 Ilmenau, Germany
来源：
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH | 2012年 / 9卷 / 01期
关键词：
Nickel; Electrodeposition; Surface morphology; Microhardness; Corrosion; ELECTRODEPOSITED NICKEL; CURRENT-DENSITY; IMPEDANCE SPECTROSCOPY; NANOCRYSTALLINE NICKEL; GRAIN-SIZE; BEHAVIOR; ELECTROCRYSTALLIZATION; MICROSTRUCTURE; MAGNETIZATION; HARDNESS;
D O I：
10.1007/s11998-011-9343-0
中图分类号：
O69 [应用化学];
学科分类号：
081704 ;
摘要：
This paper deals with the preparation and characterization of thin Ni layers. The electrodeposition was carried out galvanostatically from a Watts bath at different current densities in the range from 1 to 10 A dm(-2) and for deposition times between 900 and 7200 s. The structure and the morphology of the nickel coatings were investigated by SEM and XRD techniques. The microhardness of deposited layers, the electrochemical behavior and the corrosion properties of the deposits were investigated by means of Vickers microhardness, polarization measurements, and electrochemical impedance spectroscopy (EIS). The uniform deposits showed fine grains and good protection against corrosion.
引用
收藏
页码：87 / 95
页数：9
相关论文
共 50 条
  • [41] Electrocatalytic nickel-based coatings from an ammonia-sulfosalicylic bath for water splitting reactions
    Dmitriev, Dmitry S.
    Tenevich, Maksim I.
    Popkov, Vadim I.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2023, 48 (59) : 22415 - 22427
  • [42] Copper-nickel alloy coating on mild steel from electrolytic bath using co-electrodeposition for improved corrosion resistance
    Priyadarshini, Sharada
    Bhat, Ramesh S.
    Bindu, A. G.
    Nagaraj, P.
    Rekha, P. D.
    RESULTS IN SURFACES AND INTERFACES, 2025, 18
  • [43] Influence of deposition parameters on microstructure and contamination of electrodeposited nickel coatings from additive-free sulphamate bath
    Savall, C.
    Godon, A.
    Creus, J.
    Feaugas, X.
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (21) : 4394 - 4402
  • [44] Electrolytic deposition and corrosion resistance of Zn-Ni coatings obtained from sulphate-chloride bath
    Wykpis K.
    Popczyk M.
    Budniok A.
    Bulletin of Materials Science, 2011, 34 (4) : 997 - 1001
  • [45] Nano SiC-Nickel Composite Coatings from a Sulfamat Bath Using Direct Current and Pulsed Direct Current
    Heidari, G.
    Tavakoli, H.
    Khoie, S. M. Mousavi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (08) : 1183 - 1188
  • [46] Nano SiC-Nickel Composite Coatings from a Sulfamat Bath Using Direct Current and Pulsed Direct Current
    G. Heidari
    H. Tavakoli
    S. M. Mousavi Khoie
    Journal of Materials Engineering and Performance, 2010, 19 : 1183 - 1188
  • [47] Study of nickel matrix composite coatings deposited from electroless plating bath loaded with TiB2, ZrB2 and TiC particles for improved wear and corrosion resistance
    Huang, Z. H.
    Zhou, Y. J.
    Nguyen, T. T.
    SURFACE & COATINGS TECHNOLOGY, 2019, 364 : 323 - 329
  • [48] Pulse electrodeposition of aluminium coatings from molten salt bath; effect of processing parameters on the coatings' corrosion and wear behaviour
    Arabnejad, Ali
    Najafisayar, Pooria
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2022, 100 (06): : 305 - 312
  • [49] Characterization and corrosion behavior of Co and Co-P coatings electrodeposited from chloride bath
    Ezhilselvi, V.
    Seenivasan, H.
    Bera, Parthasarathi
    Anandan, Chinnasamy
    RSC ADVANCES, 2014, 4 (86) : 46293 - 46304
  • [50] Development of high corrosion resistant (Ni-Fe) alloy coatings from a low concentration bath through multilayer approach
    Rai, Tadagaje Yathish
    Hegde, Ampar Chitharanjan
    MATERIALS SCIENCE AND TECHNOLOGY, 2025, 41 (02) : 77 - 89
12345