Development of FCG Dynamic Control Technique at Mixed Charging of Massive Coke into Ore Layer

被引：8

作者：

Murao, Akinori ^{[1
]}

Kashihara, Yusuke ^{[2
]}

Watakabe, Shiro ^{[1
]}

Sato, Michitaka ^{[1
]}

机构：

[1] JFE Steel Corp, Steel Res Lab, Fukuyama, Hiroshima 7218510, Japan

[2] JFE Steel Corp, Steel Res Lab, Chuo Ku, Chiba 2600835, Japan

来源：

ISIJ INTERNATIONAL | 2011年 / 51卷 / 08期

关键词：

blast furnace; CO2; emission; low RAR operation; bell-less charging; coke mixed charging; coke mixed ratio; coke mixing method; simultaneous discharging; burden distribution; permeability; cohesive zone; HIGH-TEMPERATURE PROPERTIES; BLAST-FURNACE OPERATION; IRON-ORES; QUALITY; DESIGN;

D O I：

10.2355/isijinternational.51.1360

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A controlling method of the radial mixed coke ratio distribution under high coke mixed charging, which is called FCG (Flow Control Gate) dynamic control method was studied with the aim of stable operation with high productivity and low RAR at Chiba No. 6 blast furnace. For this purpose, scale model experiments and mathematical burden distribution model calculations were performed. The effects of FCG dynamic control with ore and coke simultaneous discharging from the respective top bunkers on the mixed coke ratio distribution were examined and applied to Chiba No. 6 blast furnace. After application of FCG dynamic control, improvements of gas utilization efficiency: +0.2%, gas permeability at cohesive zone (the part of lower shaft): -14.7% and coke ratio: -4.2 kg/t (with constant RAR) were confirmed. Since June 2007, high productivity operation with low RAR has been conducted at Chiba No. 6 blast furnace.

引用

页码：1360 / 1367

页数：8

共 19 条

[1]

ANAN K, 1999, CAMP ISIJ, V12, P234

[2] Optimization of ironmaking process for reducing CO2 emissions in the integrated steel works [J].

Ariyama, Tatsuro ;

Sato, Michitaka .

ISIJ INTERNATIONAL, 2006, 46 (12) :1736-1744

[3]

Ariyama T, 2006, TETSU TO HAGANE, V92, P114

[4]

HOTTA H, 1984, TETSU TO HAGANE, V70, pS814

[5]

KOKUBU H, 1984, TETSU TO HAGANE, V70, pS50

[6]

Kondoh M., 1981, TETSU TO HAGANE, V67, pS709

[7]

KURITA K, 1987, TETSU TO HAGANE, V73, pS2

[8] APPLICATION OF HIGH-TEMPERATURE PROPERTIES TEST-RESULTS TO BLAST-FURNACE OPERATION ANALYSIS AND QUALITY DESIGN OF SINTER [J].

MOCHIZUKI, K ;

MURAI, T ;

KAWAGUCHI, Y ;

IWANAGA, Y .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (14) :1855-1861

[9]

Nouchi T, 2000, TETSU TO HAGANE, V86, P293

[10]

Okazaki T., 2005, OPERATIONS RES SOC J, P465

← 1 2 →