Analysis of explosion combustion phenomenon with ammonium nitrate

In this study, an explosion combustion phenomenon of ammonium nitrate (rho=1.7kg/cm(3)) was used instead of the explosive PETN and the ultra-high-speed destruction phenomenon of aluminum Tinder was analyzed. The mix powder obtained by mixing aluminum powder (rho=2.7kg/cm(3)) and ammonium nitrate was used instead of the explosive PETN, and an explosive combustion phenomenon was generated using copper wire explosion by high-voltage capacitor bank (40kV, 12.5 mu F). Ammonium nitrate and aluminum powder are kneaded in a combination ratio of 5 : I in mass. An aluminum cylinder was destroyed by the phenomenon. The experiments were conducted using various diameters of ammonium nitrate particle and the photographs of the phenomenon were taken by the high-speed camera (IMACON468) and the high-speed video camera (HPV-1). The fragments of aluminum cylinder were collected and their dimensions were measured. The explosion phenomenon and fragments were compared with the result by explosive PETN. This paper presents these experiments and analysis result. And, hydro codes have been applied to simulate the deformation behavior of the aluminum cylinder.