High-temperature behavior of silicone rubber composite with boron oxide/calcium silicate

The ceramifiable silicone rubber (SR) composite is prepared using boron oxide, calcium silicate, and kaolin as ceramifiable fillers. The effects of the content of CaSiO3/B2O3 on the high-temperature properties of composites are investigated. In the process of decomposition and oxidation of the ceramifiable SR composite in air, B2O3, and low-melting-point glass frit that participate in the formation of the residue network structure in different temperature regions, it continuously produces a liquid phase during the process of the ceramifying transformation. Microscopic images reveal that different structures are formed at different temperatures. The network structure of the ceramic residue becomes increasingly compact with the increase in temperature from 600 degrees C to 800 degrees C, which has a better protective effect on heat transfer and mass loss. At 900 degrees C, with the lattice reconstruction of calcium silicate and the change of crystal structure, volume expansion occurs after cooling, alleviating the volume shrinkage caused by ceramic phase formation in the process of ablation. When the ratio of CaSiO3/B2O3 reaches 1:1 (both are 15 phr), the bending strength and linear shrinkage of the composites reach a satisfactory balance, the bending strength and the shrinkage reach 18.5 MPa and 12.1%, respectively.