Spectral estimation method for noisy data using a noise reference

The development of array processing methods to extract the useful characteristics of acoustic sources such as their locations and absolute levels, starting from the measured sound field is one of the main issues in aero-acoustics. The conventional beamforming method is a very popular technique investigated to solve the power level estimation problem. It has the advantage of being robust, easy to implement and cheap in computation time. However, this technique is also known for having poor spatial resolution capabilities which prevents the correct source levels being obtained for numerous practical applications. Deconvolution techniques of the result computed with CBF, with the point spread function of the array manifold, may restore the power levels of the acoustic sources that would be observed in the absence of the array resolution effects. However, the accuracy of the results provided by deconvolution methods is very sensitive to background noise, always present in acoustic measurements. This process should be carried out after the additive noise has been suitably attenuated and, ideally, the deconvolution operator should amplify the noise as little as possible. Another approach is described in the article. It consists in using a noise reference and a new technique called spectral estimation method with additive noise to remove both the smearing effect produced by the array response and the background noise. The technique has been applied to computer and experimental simulations conducted both in an anechoic chamber and in the test section of an open wind tunnel involving acoustic sources radiating in a noisy environment. The levels of the sources were found with a good level of accuracy and the background noise greatly reduced, confirming the validity of the approach and the satisfactory performance of the method proposed. (C) 2010 Elsevier Ltd. All rights reserved.