Toughness of Advanced High Strength Bainitic Steels

被引：10
|
作者：
Caballero, F. G. [1 ]
Chao, J. [1 ]
Cornide, J. [1 ]
Garcia-Mateo, C. [1 ]
Santofimia, M. J. [2 ,3 ]
Capdevila, C. [1 ]
机构：
[1] CSIC, CENIM, Dept Met Phys, Avda Gregorio Amo 8, E-28040 Madrid, Spain
[2] Netherlands Inst Metals Res, NL-2628 CD Delft, Netherlands
[3] Delft Univ Technol, Dept Mat Sci & Engn, NL-2628 CD Delft, Netherlands
来源：
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词：
toughness; coalesced bainite; steels; COMPOSITION PROPERTY APPROACH; SILICON STEELS; PART; DESIGN; CARBON;
D O I：
10.4028/www.scientific.net/MSF.638-642.118
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Carbide free bainite has achieved the highest strength and toughness combinations to date for bainitic steels in as-rolled conditions By alloying designing and with the help of phase transformation theory, It was possible to improve simultaneously the strength and toughness because of the ultra-fine grain size of the bainitic ferrite plates Ultimate tensile strengths ranging from 1600 MPa to 1800 MPa were achieved while keeping a total elongation higher than 10 %. Their toughness at room temperature matches tempered martensitic steels, known to be the best-in-class regarding this property. However, it has been observed that the presence of coalesced bainite leads to a dramatic deterioration in toughness in these novel high strength bainitic steels.
引用
收藏
页码：118 / +
页数：2
相关论文
共 50 条
  • [31] Phase Equilibrium and Austenite Decomposition in Advanced High-Strength Medium-Mn Bainitic Steels
    Grajcar, Adam
    Zalecki, Wladyslaw
    Burian, Wojciech
    Kozlowska, Aleksandra
    METALS, 2016, 6 (10):
  • [32] INFLUENCE OF WARM ROLLING ON FRACTURE TOUGHNESS OF BAINITIC STEELS
    OSBORNE, DE
    EMBURY, JD
    METALLURGICAL TRANSACTIONS, 1973, 4 (09): : 2051 - 2061
  • [33] Ultrahigh impact toughness achieved in high strength bainitic ferrite/ retained austenite lamellar steels below-Mf temperature
    Wang, Kun
    Hu, Feng
    Zhou, Songbo
    Isayev, Oleg
    Yershov, Serhii
    Zhang, Zhicheng
    Wu, Kaiming
    MATERIALS LETTERS, 2022, 324
  • [34] Influence of sulphur and vanadium additions on toughness of bainitic steels
    Tsunekage, N
    Kobayashi, K
    Tsubakino, H
    MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (07) : 847 - 855
  • [35] Identification of fracture toughness parameters to understand the fracture resistance of advanced high strength sheet steels
    Frometa, D.
    Parareda, S.
    Lara, A.
    Molas, S.
    Casellas, D.
    Jonsen, P.
    Calvo, J.
    ENGINEERING FRACTURE MECHANICS, 2020, 229
  • [36] TOUGHNESS OF HIGH-STRENGTH HOT ROLLED STEELS
    BUCHER, JH
    GROZIER, JD
    METALS ENGINEERING QUARTERLY, 1965, 5 (04): : 1 - &
  • [37] Dynamic Fracture Toughness of High Strength Cast Steels
    L. Bartlett
    A. Dash
    D. Van Aken
    V. Richards
    K. Peaslee
    International Journal of Metalcasting, 2013, 7 : 17 - 33
  • [38] MICROSTRUCTURE AND TOUGHNESS OF HIGH-TENSILE STRENGTH STEELS
    OHTANI, H
    TERASAKI, F
    KUNITAKE, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1972, 12 (02) : 185 - &
  • [39] Effect of microstructure on the impact toughness of high strength steels
    Gutierrez, Isabel
    REVISTA DE METALURGIA, 2014, 50 (04) : e029
  • [40] DYNAMIC FRACTURE TOUGHNESS OF HIGH STRENGTH CAST STEELS
    Bartlett, L.
    Dash, A.
    Van Aken, D.
    Richards, V.
    Peaslee, K.
    INTERNATIONAL JOURNAL OF METALCASTING, 2013, 7 (04) : 17 - 33
12345