Toughness of Advanced High Strength Bainitic Steels

被引：10
|
作者：
Caballero, F. G. [1 ]
Chao, J. [1 ]
Cornide, J. [1 ]
Garcia-Mateo, C. [1 ]
Santofimia, M. J. [2 ,3 ]
Capdevila, C. [1 ]
机构：
[1] CSIC, CENIM, Dept Met Phys, Avda Gregorio Amo 8, E-28040 Madrid, Spain
[2] Netherlands Inst Metals Res, NL-2628 CD Delft, Netherlands
[3] Delft Univ Technol, Dept Mat Sci & Engn, NL-2628 CD Delft, Netherlands
来源：
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词：
toughness; coalesced bainite; steels; COMPOSITION PROPERTY APPROACH; SILICON STEELS; PART; DESIGN; CARBON;
D O I：
10.4028/www.scientific.net/MSF.638-642.118
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Carbide free bainite has achieved the highest strength and toughness combinations to date for bainitic steels in as-rolled conditions By alloying designing and with the help of phase transformation theory, It was possible to improve simultaneously the strength and toughness because of the ultra-fine grain size of the bainitic ferrite plates Ultimate tensile strengths ranging from 1600 MPa to 1800 MPa were achieved while keeping a total elongation higher than 10 %. Their toughness at room temperature matches tempered martensitic steels, known to be the best-in-class regarding this property. However, it has been observed that the presence of coalesced bainite leads to a dramatic deterioration in toughness in these novel high strength bainitic steels.
引用
收藏
页码：118 / +
页数：2
相关论文
共 50 条
  • [1] Toughness deterioration in advanced high strength bainitic steels
    Caballero, F. G.
    Chao, J.
    Cornide, J.
    Garcia-Mateo, C.
    Santofimia, M. J.
    Capdevila, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 525 (1-2): : 87 - 95
  • [2] Advanced ultra high strength bainitic steels
    Caballero, F. G.
    Garcia-Mateo, C.
    Capdevila, C.
    de Andres, C. Garcia
    MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (04) : 502 - 506
  • [3] Advanced ultra-low carbon bainitic steels with high toughness
    Lis, AK
    Lis, J
    Jeziorski, L
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 64 (1-3) : 255 - 266
  • [4] Optimization of alloying element types and contents in high strength and high toughness bainitic steels
    Zhu, Ranran
    Long, Xiaoyan
    Zhang, Fucheng
    Yang, Zhinan
    Li, Yanguo
    Yang, Yan
    Wang, Yifei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 2728 - 2739
  • [5] Viewpoints on Technological Aspects of Advanced High-Strength Bainitic Steels
    Morales-Rivas, Lucia
    METALS, 2022, 12 (02)
  • [6] Microstructural effects on the fracture toughness of advanced high strength steels
    Wu, Zhanfang
    Liu, Zhenyu
    Li, Xiangyang
    MATERIALS LETTERS, 2020, 271
  • [7] Friction stir welding of advanced high strength (bainitic) steels for automotive applications
    Ramakrishna, V. S. M. R.
    Rao, K. Bhanu Sankara
    Reddy, G. Madhusudan
    Gautam, Jai Prakash
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 17139 - 17146
  • [8] The effect of Si on the toughness of high strength Mn-Si-Cr series bainitic steels
    Tan, ZL
    Bai, BZ
    Fang, HS
    Yang, FB
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 213 - 216
  • [9] Novel Approach of Nanostructured Bainitic Steels' Production with Improved Toughness and Strength
    Kirbis, Peter
    Anzel, Ivan
    Rudolf, Rebeka
    Bruncko, Mihael
    MATERIALS, 2020, 13 (05)
  • [10] Ultra-high-strength bainitic steels
    Garcia-Mateo, C
    Caballero, FG
    ISIJ INTERNATIONAL, 2005, 45 (11) : 1736 - 1740
12345