Analysis of acting forces on rollers under the billet caster mould in the zone of secondary cooling

被引：0

作者：

Androsenko, Mariya ^{[1
]}

Reshetnikova, Elena ^{[1
]}

Tyuteryakov, Nail ^{[1
]}

机构：

[1] Nosov Magnitogorsk State Tech Univ, Lenin Ave 38, Magnitogorsk 455000, Russia

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷

关键词：

Quality of production; Continuously cast preparation; Unit of the continuous molding of preparation; Geometrical and physical parameters;

D O I：

10.1016/j.matpr.2019.08.098

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Performance of secondary cooling zone rollers manufactured by "VAI FUCHS" and installed on the mould have been examined to determine such factors as the influence of the design of the mold foot rollers on the parameters of the billet. Calculations confirming the feasibility of the proposed solution have been made. The values of the bending moments and shear forces of the three-roller assembly are lower and fluctuate within 10%, which, if used, can reduce the likelihood of ingot bleeding and, consequently, can lead to an increase in the performance of the continuous casting machine. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2458 / 2461

页数：4