Fracture toughness and surface morphology of Al2O3/Pt composites

被引：3

作者：

Lee, Dong-Jin ^{[1
]}

Choi, Heung-Soap ^{[2
]}

Jin, Fan-Long ^{[3
,4
]}

Park, Soo-Jin ^{[4
]}

机构：

[1] Nano Technol Inc, Daejon 306801, South Korea

[2] Hongik Univ, Dept Mech & Design Engn, Sejong 339701, South Korea

[3] Jilin Inst Chem Technol, Dept Polymer Mat, Jilin 132022, Peoples R China

[4] Inha Univ, Dept Chem, Inchon 402751, South Korea

来源：

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY | 2015年 / 25卷

关键词：

Al2O3; Pt; Composites; Fracture toughness; Morphology; MECHANICAL-PROPERTIES; EPOXY-RESINS; CARBON NANOTUBES; BEHAVIOR; MICROSTRUCTURE; IMPROVEMENT; HARDNESS; ARB; SHS;

D O I：

10.1016/j.jiec.2014.10.025

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

In the present study, Al2O3-based composites with dispersed Pt particles were prepared by using a reduction-precipitation method. Particle distribution, fracture toughness, and morphology of the prepared Al2O3/Pt composites were studied. Crystal structure of the composites was evaluated by analyzing Pt characteristic peaks in the X-ray diffraction spectra. Transmission electron microscopy images indicated that the Pt particles were uniformly dispersed in the Al2O3 powder. The fracture toughness of the Al2O3 matrix was improved by the addition of Pt particles, since these particles effectively resisted crack propagation in the Al2O3/Pt composites. Scanning electron microscopy images indicated that the fracture of the composites followed an intergranular mechanism, typical of ceramic materials, at low Pt content, whereas a transgranular mechanism occurred at high Pt content. (C) 2014 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.

引用

页码：5 / 8

页数：4

共 27 条

[1] Influence of Al2O3:TiO2 ratio on the structural and optical properties of TiO2-Al2O3 nano-composite films produced by sol gel method
Arier, Umit Ozlem Akkaya
Tepehan, Fatma Zehra
[J]. COMPOSITES PART B-ENGINEERING, 2014, 58 : 147 - 151
[2] Investigation of grain refinement in Al/Al2O3/B4C nano-composite produced by ARB
Beni, Hossein Akbari
Alizadeh, Morteza
Ghaffari, Mohammad
Amini, Rasool
[J]. COMPOSITES PART B-ENGINEERING, 2014, 58 : 438 - 442
[3] Dong W, 2014, J IND ENG CHEM, V20, P1220
[4] Microstructural characterization of novel Mo-Re-Al2O3 composite
Dubiel, Beata
Chmielewski, Marcin
Moskalewicz, Tomasz
Gruszczynski, Adam
Czyrska-Filemonowicz, Aleksandra
[J]. MATERIALS LETTERS, 2014, 124 : 137 - 140
[5] Mechanical and dielectric properties of short carbon fiber reinforced Al2O3 composites with MgO additive
Huang, Shanshan
Zhou, Wancheng
Luo, Fa
Wei, Ping
Zhu, Dongmei
[J]. CERAMICS INTERNATIONAL, 2014, 40 (02) : 2785 - 2791
[6] Wear behavior of nanostructured Al/Al2O3 composite fabricated via accumulative roll bonding (ARB) process
Jamaati, Roohollah
Naseri, Majid
Toroghinejad, Mohammad Reza
[J]. MATERIALS & DESIGN, 2014, 59 : 540 - 549
[7] Thermo-mechanical behaviors of epoxy resins reinforced with nano-Al2O3 particles
Jiang, Wei
Jin, Fan-Long
Park, Soo-Jin
[J]. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2012, 18 (02) : 594 - 596
[8] Impact-strength improvement of epoxy resins reinforced with a biodegradable polymer
Jin, Fan-Long
Park, Soo-Jin
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 478 (1-2): : 402 - 405
[9] Surface treatment of montmorillonite on the thermal stabilities of bisphenol-A diglycidyl dimethacrylate nanocomposites
Jin, Fan-Long
Rhee, Kyong-Yop
Park, Soo-Jin
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 435 : 429 - 433
[10] Functionalization of multi-walled carbon nanotubes by epoxide ring-opening polymerization
Jin, Fan-Long
Rhee, Kyong Yop
Park, Soo-Jin
[J]. JOURNAL OF SOLID STATE CHEMISTRY, 2011, 184 (12) : 3253 - 3256

← 1 2 3 →