Effects of alloying elements on microstructure and fracture properties of cast high speed steel rolls Part II. Fracture behavior

被引:82
作者
Hwang, KC [1 ]
Lee, S
Lee, HC
机构
[1] Pohang Univ Sci & Technol, Ctr Adv Aerosp Mat, Pohang 790784, South Korea
[2] Kangwon Ind Ltd, Roll Technol Dept, Pohang 790370, South Korea
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1998年 / 254卷 / 1-2期
关键词
high speed steel (HSS) roll; fracture behavior; in situ SEM fracture test; fracture toughness; microfracture mechanism;
D O I
10.1016/S0921-5093(98)00694-7
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This study is concerned with the effects of the microstructural factors such as hard carbides located along solidification cell boundary and the type of the martensite matrix on fracture property of six high speed steel (HSS) rolls manufactured by centrifugal casting method. In situ fracture observation, fracture toughness measurement, and fractographic observation were conducted on these rolls to clarify the microfracture mechanism. The in situ test results indicated that hard carbides located along cell boundary provided easily intracellular fracture sites under low stress intensity factor levels. In the rolls containing a small amount of intercellular carbides and lath-type tempered martensite matrix, fracture occurred along a tortuous transcellular path since carbides were well spaced, thereby leading to the improvement of fracture toughness. In order to obtain better microstructure, hardness, and fracture toughness of the HSS rolls, it is suggested that the optimization of alloying elements is required to achieve the more homogeneous distribution of hard intercellular carbides and the lath-type tempered martensite matrix. (C) 1998 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:296 / 304
页数:9
相关论文
共 13 条
[1]  
BROEK D, 1983, ELEMENTARY ENG FRACT, pCH8
[2]  
DEBARBADILLO JJ, 1981, IRON STEEL ENG, V58, P63
[3]  
HWANG KC, 1998, MAT SCI ENG A-STRUCT, P282
[4]  
JUDO RR, 1979, IRON STEEL ENG, V56, P51
[5]  
KANNINEN MF, 1985, ADV FRACTURE MECH, pCH1
[6]   INSITU FRACTURE OBSERVATIONS ON TEMPERED MARTENSITE EMBRITTLEMENT IN AN AISI 4340 STEEL [J].
KIM, BC ;
LEE, S ;
LEE, DY ;
KIM, NJ .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (08) :1889-1892
[7]   K(IC) MODELING FOR A CRITICAL STRAIN CRITERION INVOLVING THE STRESS TRIAXIALITY EFFECT [J].
KIM, YH ;
KWON, D ;
LEE, S .
ACTA METALLURGICA ET MATERIALIA, 1994, 42 (06) :1887-1891
[8]  
KUANG ZB, 1982, ENG FRACT MECH, V16, P19, DOI 10.1016/0013-7944(82)90032-7
[9]   Correlation of microstructure and fracture toughness in three high-speed steel rolls [J].
Lee, S ;
Sohn, KS ;
Lee, CG ;
Jung, BI .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (01) :123-134
[10]   EVALUATION OF TOUGHNESS IN AISI 4340 ALLOY-STEEL AUSTENITIZED AT LOW AND HIGH-TEMPERATURES [J].
RITCHIE, RO ;
FRANCIS, B ;
SERVER, WL .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1976, 7 (06) :831-838