Research on instantaneous optimal control of the hybrid electric vehicle with planetary gear sets

被引:12
作者
Wang, Shaohua [1 ]
Zhang, Sheng [1 ]
Shi, Dehua [2 ]
Sun, Xiaoqiang [2 ]
He, Jianqiang [1 ]
机构
[1] Jiangsu Univ, Sch Automot & Traff Engn, Zhenjiang 212013, Peoples R China
[2] Jiangsu Univ, Automot Engn Res Inst, Zhenjiang 212013, Peoples R China
关键词
Power-split HEV; Planetary power coupling mechanism; Energy management; A-ECMS; ENERGY MANAGEMENT; DESIGN; TRANSMISSION; SYSTEM; SIMULATION; MODEL; HEV;
D O I
10.1007/s40430-018-1550-5
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Power-split hybrid electric vehicle (HEV), mainly adopting the planetary power coupling mechanism, is superior in improving the fuel economy because the engine speed and torque are decoupled from those of the wheels. Focusing on a power-split HEV with dual-planetary gear sets, this paper establishes an instantaneous optimal control to regulate its power flow. Firstly, simulation-oriented models are established, including the coupling mechanism, the engine, the electrical machines and the battery. Secondly, feasible operation modes of the vehicle are analyzed. Also, the torque and speed equations between the engine and motors are obtained. On the basis of the above, the instantaneous optimization strategy, adaptive equivalent fuel consumption minimization strategy (A-ECMS), is designed, which is developed from the equivalent fuel consumption minimization strategy. The optimization strategy is of high robustness to different driving cycles. To realize the engine speed tracking, a PI controller is introduced. At last, the control effects of A-ECMS are compared with the effects of the engine optimal operating line control strategy. The effectiveness and rationality of two strategies are tested in the dSPACE real-time simulator. Test results under different driving scenarios prove that the A-ECMS is of better performance in ensuring the HEV fuel economy and the battery charging sustainability.
引用
收藏
页数:12
相关论文
共 36 条
[1]   Power flow and efficiency analysis of the EM power split mechanism [J].
Ahmadizadeh, Pouyan ;
Mashadi, Behrooz .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (06) :1947-1955
[2]   A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units [J].
Bayindir, Kamil Cagatay ;
Gozukucuk, Mehmet Ali ;
Teke, Ahmet .
ENERGY CONVERSION AND MANAGEMENT, 2011, 52 (02) :1305-1313
[3]   MPC-Based Energy Management of a Power-Split Hybrid Electric Vehicle [J].
Borhan, Hoseinali ;
Vahidi, Ardalan ;
Phillips, Anthony M. ;
Kuang, Ming L. ;
Kolmanovsky, Ilya V. ;
Di Cairano, Stefano .
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2012, 20 (03) :593-603
[4]  
Burress T A, 2011, OFFICE SCI TECHNICAL
[5]   Design and Analysis of an Electrical Variable Transmission for a Series-Parallel Hybrid Electric Vehicle [J].
Chen, Li ;
Zhu, Futang ;
Zhang, Minmin ;
Huo, Yi ;
Yin, Chengliang ;
Peng, Huei .
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2011, 60 (05) :2354-2363
[6]  
Chen Long, 2015, Journal of Jiangsu University (Natural Science Edition), V36, P6, DOI 10.3969/j.issn.1671-7775.2015.01.002
[7]   A control-oriented simulation model of a power-split hybrid electric vehicle [J].
Cipek, Mihael ;
Pavkovic, Danijel ;
Petric, Josko .
APPLIED ENERGY, 2013, 101 :121-133
[8]   Modelling and control of hybrid electric vehicles (A comprehensive review) [J].
Enang, Wisdom ;
Bannister, Chris .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2017, 74 :1210-1239
[9]   A Supervisory Control Strategy for Plug-In Hybrid Electric Vehicles Based on Energy Demand Prediction and Route Preview [J].
Feng Tianheng ;
Yang Lin ;
Gu Qing ;
Hu Yanqing ;
Yan Ting ;
Yan Bin .
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2015, 64 (05) :1691-1700
[10]   A novel method for the design of regenerative brake system in an urban automotive [J].
Ghafouryan, Mohammad Mostafa ;
Ataee, Sadegh ;
Dastjerd, Fateme Tavakoli .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2016, 38 (03) :945-953