Creep-fatigue interaction behaviour of a 15Cr-15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure

被引：14
作者：
Sandhya, R [1 ]
Rao, KBS [1 ]
Mannan, SL [1 ]
机构：
[1] Indira Gandhi Ctr Atom Res, Mat Dev Grp, Kalpakkam 603102, Tamil Nadu, India
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 392卷 / 1-2期
关键词：
Ti modified stainless steel; creep-fatigue interaction; low cycle fatigue; microstructure; precipitation; cold work;
D O I：
10.1016/j.msea.2004.09.040
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The creep-fatigue interaction behaviour of a 15Cr-15Ni, Ti modified austenitic stainless steel has been characterized as a function of Ti/C ratio and microstructure. Creep-fatigue interaction behaviour has been investigated in this material, by introducing hold times with durations ranging from 1 to 10 min at peak tensile strain. The material was tested at 923 K in Ti/C ratios of 4 and 8 and in the solution annealed, cold worked and aged conditions. It has been ascertained that precipitation controls creep-fatigue interaction properties in this alloy. Carbides which precipitate on the grain boundaries in the solution annealed material are found to be beneficial to creep-fatigue interaction properties, while fine titanium carbides which precipitate in the matrix in cold worked and aged conditions of the alloy, have been found detrimental to creep-fatigue interaction properties. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：326 / 334
页数：9
相关论文
共 40 条
  • [11] HARROD DL, 1976, S CREEP FATIGUE INT, P87
  • [12] A PROPOSED MODEL FOR THE DISAPPEARANCE OF SERRATED FLOW IN 2 FE ALLOYS
    HAYES, RW
    HAYES, WC
    [J]. ACTA METALLURGICA, 1984, 32 (02): : 259 - 267
  • [13] IRVINE KJ, 1960, JISI, V194, P166
  • [14] KESTERNICH W, 1986, P 7 EUR C EL MICR TH, V1, P108
  • [15] LAGNEBORG R, 1971, METALL TRANS, V2, P1821
  • [16] Levaillant C., 1977, MECH BEHAV MAT, P163
  • [17] LEVAILLANT C, 1988, ASTM STP, V942, P414
  • [18] LLOYD GJ, 1979, MET SCI, P39
  • [19] ELEVATED-TEMPERATURE LOW-CYCLE FATIGUE BEHAVIOR OF DIFFERENT HEATS OF TYPE-304 STAINLESS-STEEL
    MAIYA, PS
    MAJUMDAR, S
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1977, 8 (11): : 1651 - 1660
  • [20] EFFECT OF VACANCY SINKS AND SOURCES ON SERRATED YIELDING DUE TO SOLUTE LOCKING
    MCCORMICK, PG
    MURTY, KL
    [J]. SCRIPTA METALLURGICA, 1972, 6 (03): : 225 - +
1234