Deformation Structure and Mechanical Properties of Pure Titanium Produced by Rotary-Die Equal-Channel Angular Pressing

被引：12
作者：
Gu, Yanxia [1 ,2 ]
Ma, Aibin [1 ,3 ]
Jiang, Jinghua [1 ,3 ]
Yuan, Yuchun [1 ]
Li, Huiyun [1 ]
机构：
[1] Hohai Univ, Coll Mech & Mat, Nanjing 211100, Jiangsu, Peoples R China
[2] Jiangsu Maritime Inst, Nanjing 211100, Jiangsu, Peoples R China
[3] Hohai Univ, Suqian Inst, Suqian 223800, Peoples R China
来源：
METALS | 2017年 / 7卷 / 08期
关键词：
pure titanium; rotary-die equal-channel angular pressing (RD-ECAP); microstructure; mechanical properties; deformation; SEVERE PLASTIC-DEFORMATION; ROOM-TEMPERATURE; TEXTURE EVOLUTION; CP-TI; MICROSTRUCTURE;
D O I：
10.3390/met7080297
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Pure titanium was efficiently processed up to four passes at 420 degrees C by rotary-die equal-channel angular pressing (RD-ECAP). The deformation structure and mechanical properties of pure titanium with various RD-ECAP passes were subsequently investigated. Microstructure evolution revealed that plastic deformation was accommodated mainly by twins during the first and second passes, while the predominant deformation mechanism was dislocation slip during the third and fourth passes. {1012} twins were detected in the first pass, and {1011} twins occurred in the second pass of RD-ECAP. The ultimate tensile strength of pure titanium increased from 450 MPa in the as-received state to 627 MPa with a fracture elongation of 29% after four passes of RD-ECAP.
引用
收藏
页数：10
相关论文
共 31 条
[1]   Novel deformation structures of pure titanium induced by room temperature equal channel angular pressing [J].
Chen, Y. J. ;
Li, Y. J. ;
Xu, X. J. ;
Hjelen, J. ;
Roven, H. J. .
MATERIALS LETTERS, 2014, 117 :195-198
[2]   Quantitative analysis of grain refinement in titanium during equal channel angular pressing [J].
Chen, Y. J. ;
Li, Y. J. ;
Walmsley, J. C. ;
Dumoulin, S. ;
Gireesh, S. S. ;
Armada, S. ;
Skaret, P. C. ;
Roven, H. J. .
SCRIPTA MATERIALIA, 2011, 64 (09) :904-907
[3]   Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium [J].
Chun, YB ;
Yu, SH ;
Semiatin, SL ;
Hwang, SK .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2) :209-219
[4]  
Elias CN., 2013, J MATER RES TECHNOL, V2, P340, DOI [10.1016/j.jmrt.2013.07.003, DOI 10.1016/J.JMRT.2013.07.003]
[5]   Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation [J].
Fan, Zhiguo ;
Jiang, Hong ;
Sun, Xiaogang ;
Song, Jie ;
Zhang, Xiaoning ;
Xie, Chaoying .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2) :45-51
[6]   Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths [J].
Hama, Takayuki ;
Nagao, Hirotaka ;
Kobuki, Akihiro ;
Fujimoto, Hitoshi ;
Takuda, Hirohiko .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 620 :390-398
[7]   Microstructural refinement of CP-Ti by cryogenic channel-die compression involving mechanical twinning [J].
Hong, D. H. ;
Hwang, S. K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 555 :106-116
[8]   Formation of {11(2)over-bar1} twin boundaries in titanium by kinking mechanism through accumulative dislocation slip [J].
Jin, Shenbao ;
Marthinsen, Knut ;
Li, Yanjun .
ACTA MATERIALIA, 2016, 120 :403-414
[9]   Effects of grain size and pressing speed on the deformation mode of commercially pure Ti during equal channel angular pressing [J].
Kim, I ;
Kim, J ;
Shin, DH ;
Park, KT .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (07) :1555-1558
[10]   Effects of equal channel angular pressing temperature on deformation structures of pure Ti [J].
Kim, I ;
Kim, J ;
Shin, DH ;
Lee, CS ;
Hwang, SK .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 342 (1-2) :302-310
1234