Partial transient liquid phase diffusion bonding of ZrC-SiC and 304 stainless steel by Ti/Ni interlayer: Microstructure and properties

被引：13

作者：

Lin Jincheng ^{[1
,2
]}

Xiao Bangyang ^{[1
]}

Xing Lili ^{[1
]}

Hu Yanying ^{[1
]}

Lin Panpan ^{[2
]}

Lin Tiesong ^{[2
]}

He Peng ^{[2
]}

Yang Weiqi ^{[1
]}

机构：

[1] Sun Yat Sen Univ, Sino French Inst Nucl Engn & Technol, Zhuhai 519082, Peoples R China

[2] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2022年 / 42卷 / 09期

基金：

中国博士后科学基金;

关键词：

ZrC-SiC; Ti-Ni; Interfacial reaction; Mechanical property; Thermodynamics; INTERFACIAL MICROSTRUCTURE; THERMODYNAMIC DESCRIPTION; MECHANICAL-PROPERTIES; EVOLUTION; SYSTEM; GROWTH; JOINTS;

D O I：

10.1016/j.jeurceramsoc.2022.03.021

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The ZrC-SiC ceramic (ZS) was joined to 304 stainless steel (304SS) by using Ti/Ni interlayer. The joining process involves a transient liquid phase bonding at the ZS interface and a diffusion bonding at the 304SS interface. It is found TiCx grew fast on ZS interface or precipitated as particles in certain region of transient liquid, and its distribution and morphology were controlled by Ti gradient. Small amount of Si dissolved into liquid and then precipitated as Ti3Ni2Si with similar lattice structure to Ti2Ni. During solid-state diffusion, the TiNi reaction layer quickly transformed to refractory TiNi3 layer with a small number of Kirkendall pores and Ni5Zr phase at the TiNi3/Ni boundary. The underlying mechanism of interfacial reactions and microstructure evolution were proposed. The maximum shear strength of 97 +/- 10 MPa was achieved when joining at 960 degrees C for 3 h. The failure mainly occurred along TiNi3/Ni boundary due to the presence of Kirkendall pores.

引用

页码：3708 / 3719

页数：12

共 28 条

[21] The system Fe-Ni-Cr: revision of the thermodynamic description
Tomiska, J
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 379 (1-2) : 176 - 187
[22] Relief of the residual stresses in Si3N4/Invar joints by multi-layered braze structure - Experiments and simulation
Wang, Tianpeng
Ivas, Toni
Lee, Wookjin
Leinenbach, Christian
Zhang, Jie
[J]. CERAMICS INTERNATIONAL, 2016, 42 (06) : 7080 - 7087
[23] Corrosion behavior of ZrC-SiC composite ceramics in LiF-NaF-KF molten salt at high temperatures
Wang, Yang
Tang, Zhong-Feng
Fu, Yuan
Huang, Shi-Rong
Zhao, Su-Fang
Zhang, Peng
Xie, Lei-Dong
Wang, Xin-Gang
Zhang, Guo-Jun
[J]. CERAMICS INTERNATIONAL, 2015, 41 (10) : 12996 - 13005
[24] Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis
Whitney, M.
Corbin, S. F.
Gorbet, R. B.
[J]. ACTA MATERIALIA, 2008, 56 (03) : 559 - 570
[25] High shear strength and ductile ZrC-SiC/austenitic stainless steel joints bonded with Ti/Ni foam interlayer
Yang Weiqi
Lin Jincheng
Ao Run
Xing Lili
[J]. CERAMICS INTERNATIONAL, 2020, 46 (03) : 3036 - 3042
[26] Microstructural Evolution and Growth Behavior of In Situ TiB Whisker Array in ZrB2-SiC/Ti6Al4V Brazing Joints
Yang, Weiqi
Lin, Tiesong
He, Peng
Zhu, Ming
Song, Changbao
Jia, Dechang
Feng, Jicai
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2013, 96 (12) : 3712 - 3719
[27] Fabrication of ZrB2-ZrC-based composites by reactive melt infiltration at relative low temperature
Zhang, Shouming
Wang, Song
Zhu, Yulin
Chen, Zhaohui
[J]. SCRIPTA MATERIALIA, 2011, 65 (02) : 139 - 142
[28] A thermodynamic description of the C-Ti-V system over the whole composition and temperature ranges
Zhang, Weibin
Peng, Yingbiao
Du, Yong
Chen, Li
Li, Yiwei
Wang, Shequan
Wen, Guanghua
Xie, Wen
[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 346 - 354

← 1 2 3 →