THE INFLUENCE OF THE ANGLE OF THE WORKING PART OF THE DIE ON THE HIGH SPEED DRAWING PROCESS OF LOW CARBON STEEL WIRES

被引：5
作者：
Suliga, M. [1 ]
Wartacz, R. [1 ]
Michalczyk, J. [1 ]
机构：
[1] Czestochowa Tech Univ, Fac Mat Proc Technol & Appl Phys, Inst Plast Forming & Safety Engn, 19 Armii Krajowej Str, PL-42200 Czestochowa, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2017年 / 62卷 / 02期
关键词：
wire; drawing angle; high speed; temperature; lubrication; mechanical properties;
D O I：
10.1515/amm-2017-0073
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The paper contains the theoretical and experimental analysis of the impact of the drawing angle on the drawing process and the properties of low carbon steel wires. A multi-stage drawing wire rod with a diameter of 5.5 mm on a wire with a diameter of 1.0 mm has been carried out in two stages. The first one consisted of preliminary drawing wire rod for the wire with a diameter of 2.2 mm which was next subjected to the drawing process at a speed of 25 m/sec at the final wire with a diameter of 1.0 mm. The wires were drawn in conventional dies with drawing angle alpha = 3, 4, 5, 6, 7 degrees. For the wires drawn in respective variants, the investigation of the mechanical properties was performed and the amount of lubricant on the surface of steel wires was determined. Numerical analysis of the process of drawing in the Drawing 2D complemented the experimental studies. It has been shown that when drawing at high speeds, properly chosen the value of the angle of the working part of the die can improve the lubrication conditions and mechanical properties of steel wires.
引用
收藏
页码：483 / 487
页数：5
相关论文
共 50 条
[21]   The Influence of Process Parameters on Non-Conventional Technology in Drawing Cassette Roller Die (Part 1) [J].
Mihu, Adriana-Maria ;
Sas-Boca, Ioana Monica ;
Marian, Ionut ;
Ilutiu-Varvara, Dana-Adriana ;
Nistor, Liviu .
9TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2015, 2016, 22 :28-33
[22]   INFLUENCE OF SPD PROCESS ON MECHANICAL PROPERTIES IN LOW CARBON STEEL [J].
Rusz, Stanislav ;
Salajka, Michal ;
Hilser, Ondrej ;
Tylsar, Stanislav ;
Kedron, Jan ;
Boruta, Josef ;
Pastrnak, Martin .
METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, :475-481
[23]   Mechanical Properties and Texture Evolution of High-Carbon Steel Wires during Wire Drawing: Strand Manufacturing [J].
Kisrane-Bouzidi, A. ;
Zidani, M. ;
Nebbar, M. C. ;
Abid, T. ;
Helbert, A. L. ;
Brisset, F. ;
Baudin, T. .
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2020, 49 :130-138
[24]   Effects of deep cryo treatment of high speed steel on the turning process of a medium carbon steel [J].
Raja, Ponnurangam ;
Malayalamurthi, Rajalingam .
MATERIALS TESTING, 2017, 59 (09) :763-768
[25]   INFLUENCE OF SPD PROCESS ON LOW-CARBON STEEL MECHANICAL PROPERTIES [J].
Rusz, Stanislav ;
Hilser, Ondrej ;
Ochodek, Vladislav ;
Cada, Radek ;
Svec, Jiri ;
Szkandera, Pavel .
MM SCIENCE JOURNAL, 2019, 2019 :2910-2914
[26]   Influence of relaxation process on the microstructure and properties of low carbon bainitic steel [J].
Shang, CJ ;
Yang, SW ;
Wang, XM ;
Wu, HB ;
He, XL .
THERMEC'2003, PTS 1-5, 2003, 426-4 :1439-1444
[27]   The Multi-Stage Drawing Process of Zinc-Coated Medium-Carbon Steel Wires in Conventional and Hydrodynamic Dies [J].
Suliga, Maciej ;
Wartacz, Radoslaw ;
Hawryluk, Marek .
MATERIALS, 2020, 13 (21) :1-14
[28]   INFLUENCE OF SEVERE PLASTIC DEFORMATION PROCESS ON MECHANICAL PROPERTIES OF LOW CARBON STEEL [J].
Rusz, Stanislav ;
Hilser, Ondrej ;
Szkandera, Pavel ;
Zabystrzan, Rostislav ;
Svec, Jiri ;
Mares, Vratislav ;
Klos, Marcel .
28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, :473-476
[29]   THE INFLUENCE OF LUBRICANT CARRIER AND LUBRICATION CONDITIONS ON MECHANICAL-TECHNOLOGICAL PROPERTIES OF HIGH CARBON STEEL WIRES [J].
Suliga, M. ;
Kruzel, R. .
METALURGIJA, 2016, 55 (04) :651-654
[30]   INFLUENCE OF PROCESSING SPEED ON HIGH CARBON STEEL WIRE GALVANIZED WEIGHT AND MECHANICAL PROPERTIES [J].
Esen, Sevim Gokce ;
Yildirimoguz, Melih ;
Cedimagar, Murat Alper .
27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, :354-358
12345