A study on the effect of surface roughness and cutting force in MQL end-milling

被引：0

作者：

Park, Su Hyun ^{[1
]}

Jung, Jong Yun ^{[1
]}

Lee, Choon Man ^{[1
]}

Hwang, Young Kug ^{[1
]}

机构：

[1] Changwon Natl Univ, Mech Design & Mfg Dept, Gyeongnam 641773, South Korea

来源：

5TH INDUSTRIAL SIMULATION CONFERENCE 2007 | 2007年

关键词：

MQL(Minimum Quantity Lubrication); cutting force; surface roughness; ANOVA;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

At present, industry and researchers are looking for ways to reduce the use of lubricants because of ecological and economical resons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. This paper presents an investigation into MQL(Minimum Quantity Lubrication) machinig for the end-milling process of aluminium. To reach these goals, finish milling experiments were carried out with MQL. The surface roughness and cutting force results of test were measured and the effects of cutting conditions were analyzed by the method of Analysis of Variance (ANOVA). From the experimental results, spindle rotation, feed per tooth and the interaction between RPM of spindle and feed per tooth and between axial depth of cut and feed per tooth are significant factors on the surface roughness.

引用

页码：142 / 146

页数：5

共 8 条

[1]

Autret Ronan, MINIMUM QUANTITY LUB

[2] Investigation of cutting parameter effects on surface roughness in lathe boring operation by use of a full factorial design [J].

Beauchamp, Y ;

Thomas, M ;

Youssef, YA ;

Masounave, J .

COMPUTERS & INDUSTRIAL ENGINEERING, 1996, 31 (3-4) :645-651

[3]

HWANG IO, 2005, MICROSCOPIC PRECISIO

[4]

LEE CM, 2005, P 14 IASTED INT C, P449

[5]

Park T.-J., 2001, J KSPE, V18, P110

[6]

RAHMAN M, 2002, INT J MACH TOOL MANU, P112

[7]

Shin SW, 2006, IMECS 2006: INTERNATIONAL MULTICONFERENCE OF ENGINEERS AND COMPUTER SCIENTISTS, P683

[8]

SREEJITH PS, 2002, J MATER PROCESS TECH, P287

← 1 →