共 2 条
- [2] Producing Lightweight Aggregates by Incorporating Waste LCD Glass with Reservoir SedimentsPROGRESS IN ENVIRONMENTAL SCIENCE AND ENGINEERING, PTS 1-4, 2013, 610-613 : 2287 - +Tang, C. W.Wang, S. Y.Cheng, C. K.Huang, C. H.
Application of the Taguchi Method for Optimizing the Process Parameters of Producing Lightweight Aggregates by Incorporating Tile Grinding Sludge with Reservoir Sediments
被引：27
|作者：
Chen, How-Ji
[1
]
Chang, Sheng-Nan
[1
]
Tang, Chao-Wei
[2
]
机构：
[1] Natl Chung Hsing Univ, Dept Civil Engn, 250 Kuo Kuang Rd, Taichung 402, Taiwan
[2] Cheng Shiu Univ, Dept Civil Engn & Geomat, 840 Chengcing Rd, Kaohsiung 83347, Taiwan
来源：
MATERIALS
|
2017年
/
10卷
/
11期
关键词：
lightweight aggregate;
reservoir sediments;
grinding sludge;
orthogonal array;
Taguchi method;
COLD BONDING PELLETIZATION;
INCINERATOR BOTTOM ASH;
SEWAGE-SLUDGE;
FLY-ASH;
CONCRETE;
WASTE;
MANUFACTURE;
PERFORMANCE;
REACTIVITY;
DESIGN;
D O I：
10.3390/ma10111294
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ;
081704 ;
摘要：
This study aimed to apply the Taguchi optimization technique to determine the process conditions for producing synthetic lightweight aggregate (LWA) by incorporating tile grinding sludge powder with reservoir sediments. An orthogonal array L-16(4(5)) was adopted, which consisted of five controllable four-level factors (i.e., sludge content, preheat temperature, preheat time, sintering temperature, and sintering time). Moreover, the analysis of variance method was used to explore the effects of the experimental factors on the particle density, water absorption, bloating ratio, and loss on ignition of the produced LWA. Overall, the produced aggregates had particle densities ranging from 0.43 to 2.1 g/cm(3) and water absorption ranging from 0.6% to 13.4%. These values are comparable to the requirements for ordinary and high-performance LWAs. The results indicated that it is considerably feasible to produce high-performance LWA by incorporating tile grinding sludge with reservoir sediments.
引用
收藏
页数：16
相关论文