Pulse combustion characteristics of various gaseous fuels

被引：13
作者：
Zhonghua, Wu
Mujumdar, Arun S.
机构：
[1] Natl Univ Singapore, Engn Sci Program, Singapore 119260, Singapore
[2] Natl Univ Singapore, Dept Mech Engn, Mineral Met & Mat Technol Ctr, Singapore 119260, Singapore
来源：
ENERGY & FUELS | 2008年 / 22卷 / 02期
关键词：
D O I：
10.1021/ef7004207
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The combustion of a gas-fired pulse combustor was simulated using a computation fluid dynamic model to understand the flame structure, gas flow, and combustion characteristics in the burner and the resulting pulsation phenomenon. The specific impulse and thrust output to power input are computed and compared. Some typical gaseous fuels such as low molecular weight hydrocarbons, high molecular weight hydrocarbons, biofuels, and mixed fuels are tested via simulation of the pulse combustor, and their operation characteristics are summarized. It was found that the combustor can adjust itself automatically over a certain range of parameters and make it suitable for different gaseous fuels. Pulse combustion performance of fuels with low and high heating values is also compared.
引用
收藏
页码：915 / 924
页数：10
相关论文
共 33 条
[11]   PULSE COMBUSTION - THE MECHANISMS OF NOX PRODUCTION [J].
KELLER, JO ;
HONGO, I .
COMBUSTION AND FLAME, 1990, 80 (3-4) :219-237
[12]   PULSE COMBUSTION - THE IMPORTANCE OF CHARACTERISTIC TIMES [J].
KELLER, JO ;
BRAMLETTE, TT ;
DEC, JE ;
WESTBROOK, CK .
COMBUSTION AND FLAME, 1989, 75 (01) :33-44
[13]   SMALL GAS-TURBINE USING A 2ND-GENERATION PULSE COMBUSTOR [J].
KENTFIELD, JAC ;
OBLENES, MJ .
JOURNAL OF PROPULSION AND POWER, 1990, 6 (02) :214-220
[14]  
Kudra T., 1995, HDB IND DRYING
[15]  
Kudra T., 2002, ADV DRYING TECHNOLOG
[16]   Use of waste fats of animal and vegetable origin for the production of biodiesel fuel: Quality, motor properties, and emissions of harmful components [J].
Lebedevas, Sergejus ;
Vaicekauskas, Andrius ;
Lebedeva, Galina ;
Makareviciene, Violeta ;
Janulis, Prutenis ;
Kazancev, Kiril .
ENERGY & FUELS, 2006, 20 (05) :2274-2280
[17]  
LIEWKONGSATAPOR.W, 2006, 15 INT DRYING S IDS
[18]   Heat transfer between materials and unsteady airflow from a Helmholtz type combustor [J].
Liu, XD ;
Cao, CW ;
Lang, ZH .
DRYING TECHNOLOGY, 2001, 19 (08) :1939-1948
[19]  
Magnussen B.F., 1976, P COMBUST INST, V16, P719, DOI DOI 10.1016/S0082-0784(77)80366-4
[20]   Theoretical and experimental investigation of the operating characteristics of a Helmholtz type pulse combustor due to changes in the inlet geometry [J].
Möller, SI ;
Lindholm, A .
COMBUSTION SCIENCE AND TECHNOLOGY, 1999, 149 (1-6) :389-+
1234