Learning based personalized energy management systems for residential buildings

被引:21
作者
Soudari, Mallikarjun [1 ]
Srinivasan, Seshadhri [2 ]
Balasubramanian, Subathra [1 ]
Vain, Juri [3 ]
Kotta, Ulle [4 ]
机构
[1] Kalasalingam Univ, Dept Instrumentat & Control Engn, Krishnan Koil, India
[2] Berkeley Educ Alliance Res Singapore, Singapore 138602, Singapore
[3] Tallinn Univ Technol, Dept Comp Sci, Tallinn, Estonia
[4] Tallinn Univ Technol, Inst Cybernet, Tallinn, Estonia
关键词
Personalized energy management systems (PEMS); Occupant behaviour; Occupancy; Radial Basis Function Neural Network (RBFNN); Adaptive Neuro Fuzzy Inference Systems (ANFIS); Hidden Markov Model (HMM); BEHAVIOR PATTERN DETECTION; OCCUPANCY; MODELS;
D O I
10.1016/j.enbuild.2016.05.059
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This investigation presents a personalized energy management system (PEMS) for heating, ventilation and air-conditioning (HVAC) systems in residential buildings based on economic model predictive control (EMPC) integrated with occupancy and occupant behaviour. The major building blocks of the PEMS are: weather forecasting tool, occupancy predictor, occupant behaviour model, cost-generator, and Economic Model Predictive Controller (EMPC). The occupancy is modelled using Hidden Markov Model (HMM), whereas Adaptive Neuro Fuzzy Inference System (ANFIS) is used to model the occupant behaviour. The cost generator computes the energy cost as the sum of personalized costs computed by using ANFIS model, time-of-use charges predicted from load-curve information, and fixed energy cost. The EMPC optimizes the energy consumption using a constrained optimization routine including the comfort margins specified by the occupant in a receding horizon manner. Performance of the PEMS is illustrated using experiments on a laboratory scale HVAC system. Our results show that the proposed controller not only reduces the energy consumption by 9.7-25%, and cost (from 8.2% to 18.2%), but also maintains the temperature within the personalized comfort band. The novelty of the proposed approach is the integration of demand response, occupancy and occupant behaviour within the PEMS framework. As a result, the proposed controller reduces energy, cost and peak-demand. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:953 / 968
页数:16
相关论文
共 35 条
  • [1] Reducing Transient and Steady State Electricity Consumption in HVAC Using Learning-Based Model-Predictive Control
    Aswani, Anil
    Master, Neal
    Taneja, Jay
    Culler, David
    Tomlin, Claire
    [J]. PROCEEDINGS OF THE IEEE, 2012, 100 (01) : 240 - 253
  • [2] Adding advanced behavioural models in whole building energy simulation: A study on the total energy impact of manual and automated lighting control
    Bourgeois, D
    Reinhart, C
    Macdonald, I
    [J]. ENERGY AND BUILDINGS, 2006, 38 (07) : 814 - 823
  • [3] Burke W, 2010, PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 3, P291
  • [4] Optimal electricity rate structures for peak demand reduction using economic model predictive control
    Cole, Wesley J.
    Morton, David P.
    Edgar, Thomas F.
    [J]. JOURNAL OF PROCESS CONTROL, 2014, 24 (08) : 1311 - 1317
  • [5] Dong B., 2010, Integrated Bulding Heating, Cooling and Ventilation Control
  • [6] A real-time model predictive control for building heating and cooling systems based on the occupancy behavior pattern detection and local weather forecasting
    Dong, Bing
    Lam, Khee Poh
    [J]. BUILDING SIMULATION, 2014, 7 (01) : 89 - 106
  • [7] Building energy and comfort management through occupant behaviour pattern detection based on a large-scale environmental sensor network
    Dong, Bing
    Lam, Khee Poh
    [J]. JOURNAL OF BUILDING PERFORMANCE SIMULATION, 2011, 4 (04) : 359 - 369
  • [8] Duong TV, 2006, INT C PATT RECOG, P202
  • [9] Erickson V. L., 2011, Proceedings 2011 10th International Conference on Information Processing in Sensor Networks (IPSN 2010), P258
  • [10] Erickson V.L., Proceedings of the 1st ACM Workshop on Embedded Sensing Systems for Energy-Efficiency in Buildings, New York, NY, USA, 2009, P19