A Field Programmable Gate Array-Based Reconfigurable Smart-Sensor Network for Wireless Monitoring of New Generation Computer Numerically Controlled Machines

被引：9

作者：

Veronica Moreno-Tapia, Sandra ^{[1
]}

Alberto Vera-Salas, Luis ^{[1
]}

Alfredo Osornio-Rios, Roque ^{[1
]}

Dominguez-Gonzalez, Aurelio ^{[1
]}

Stiharu, Ion

de Jesus Romero-Troncoso, Rene ^{[2
]}

机构：

[1] Univ Autonoma Queretaro, Fac Ingn, HSPdigital CA Mecatron, San Juan Del Rio 76807, Qro, Mexico

[2] Univ Guanajuato, DICIS, HSPdigital CA Telemat, Salamanca 36885, Gto, Spain

来源：

SENSORS | 2010年 / 10卷 / 08期

关键词：

smart sensors; wireless sensor network; FPGA; CNC monitoring; TOOL; SYSTEM; SIGNALS; POSITION;

D O I：

10.3390/s100807263

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

Computer numerically controlled (CNC) machines have evolved to adapt to increasing technological and industrial requirements. To cover these needs, new generation machines have to perform monitoring strategies by incorporating multiple sensors. Since in most of applications the online Processing of the variables is essential, the use of smart sensors is necessary. The contribution of this work is the development of a wireless network platform of reconfigurable smart sensors for CNC machine applications complying with the measurement requirements of new generation CNC machines. Four different smart sensors are put under test in the network and their corresponding signal processing techniques are implemented in a Field Programmable Gate Array (FPGA)-based sensor node.

引用

页码：7263 / 7286

页数：24

共 32 条

[1] A method for measuring and calibrating resistive microtorque of a mechanical microcounter
Acar, M.
Atterbury, D. A.
Fisher, D.
Lewis, M. J.
Porro, J. W.
Seymour, H. G.
[J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2009, 33 (02): : 209 - 213
[2] Suitability of MEMS accelerometers for condition monitoring: An experimental study
Albarbar, Alhussein
Mekid, Samir
Starr, Andrew
Pietruszkiewicz, Robert
[J]. SENSORS, 2008, 8 (02) : 784 - 799
[3] Analysis of the structure of vibration signals for tool wear detection
Alonso, F. J.
Salgado, D. R.
[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2008, 22 (03) : 735 - 748
[4] FPGA-Based Vibration Analyzer for Continuous CNC Machinery Monitoring With Fused FFT-DWT Signal Processing
de Jesus Rangel-Magdaleno, Jose
de Jesus Romero-Troncoso, Rene
Alfredo Osornio-Rios, Roque
Cabal-Yepez, Eduardo
Dominguez-Gonzalez, Aurelio
[J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2010, 59 (12) : 3184 - 3194
[5] Drill wear monitoring using cutting force signals
Ertunc, HM
Oysu, C
[J]. MECHATRONICS, 2004, 14 (05) : 533 - 548
[6] Sensorless tool failure monitoring system for drilling machines
Franco-Gasca, LA
Herrera-Ruiz, G
Peniche-Vera, R
Romero-Troncoso, RD
Leal-Tafolla, W
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (3-4) : 381 - 386
[7] Tool wear detection and fault diagnosis based on cutting force monitoring
Huang, S. N.
Tan, K. K.
Wong, Y. S.
de Silva, C. W.
Goh, H. L.
Tan, W. W.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (3-4) : 444 - 451
[8] *IEEE 80211B, 1999, WIR LAN MED ACC C MA
[9] *IEEE 802151, 2005, WIR MED ACC CONTR MA
[10] *IEEE 802154, 2006, WIR MED ACC CONTR MA

← 1 2 3 4 →