HOT DEFORMATION OF 6XXX SERIES ALUMINIUM ALLOYS

被引：10
作者：
Mrowka-Nowotnik, G. [1 ]
Sieniawski, J. [1 ]
Kotowski, S. [1 ]
Nowotnik, A. [1 ]
Motyka, M. [1 ]
机构：
[1] Rzeszow Univ Technol, Dept Mat Sci, PL-35959 Rzeszow, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2015年 / 60卷 / 02期
关键词：
Aluminum alloy; Hot deformation; Microstructural evolution; Activation energy; INTERMETALLIC PHASES; PRECIPITATION; SI;
D O I：
10.1515/amm-2015-0263
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The hot deformation behavior of the 6xxx aluminum alloys was investigated by compression tests in the temperature range 100 degrees C-375 degrees C and strain rate range 10(-4)s(-1) and 4x10(-4)s(-1) using dilatometer DIL 805 BAHR Thermoanalyse equipped with accessory attachment deformation allows the process to execute thermo-plastic in vacuum and inert gas atmosphere. Associated microstructural changes of characteristic states of examined alloys were studied by using the transmission electron microscope (TEM). The results show that the stress level decreases with increasing deformation temperature and deformation rate. And was also found that the activation energy Q strongly depends on both, the temperature and rate of deformation. The results of TEM observation showing that the dynamic flow softening is mainly as the result of dynamic recovery and recrystallization of 6xxx aluminium alloys.
引用
收藏
页码：1079 / 1084
页数：6
相关论文
共 50 条
  • [31] Nucleation and transformation of Zr-bearing dispersoids in Al–Mg–Si 6xxx alloys
    Ali Elasheri
    Emad M. Elgallad
    Nick Parson
    X.-Grant Chen
    Journal of Materials Research, 2023, 38 : 696 - 707
  • [32] The heat treatment of rheo-high pressure die cast 6xxx series Al-Mg-Si-(Cu) alloys
    Moeller, Heinrich
    Daswa, Pfarelo
    Govender, Gonasagren
    ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 137 - 142
  • [33] Sc-Containing Al-Si-Mg (6xxx) Alloys for Automotive Extrusions
    Shomali, Avishan
    Langan, Timothy
    Wood, Thomas
    Sanders, Paul
    LIGHT METALS 2024, 2024, : 1111 - 1119
  • [34] The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys
    Zhong, Hao
    Rometsch, Paul A.
    Estrin, Yuri
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (08): : 3970 - 3983
  • [35] Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels
    Khangholi, Siamak Nikzad
    Javidani, Mousa
    Maltais, Alexandre
    Chen, X-Grant
    17TH INTERNATIONAL CONFERENCE ON ALUMINIUM ALLOYS 2020 (ICAA17), 2020, 326
  • [36] Influence of natural aging and ramping before artificial aging on the microstructure of two different 6xxx alloys
    Hell, Christoph Martin
    Soreide, Hanne-Sofie
    Bjorge, Ruben
    Marioara, Calin Daniel
    Li, Yanjun
    Holmestad, Randi
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 4224 - 4240
  • [37] Grain evolution analysis and experimental validation in the extrusion of 6XXX alloys by use of a lagrangian FE code
    Donati, Lorenzo
    Segatori, Antonio
    El Mehtedi, Mohamad
    Tomesani, Luca
    INTERNATIONAL JOURNAL OF PLASTICITY, 2013, 46 : 70 - 81
  • [38] Effect of Alloy Composition and Pre-Ageing on the Stretch Formability of 6xxx Automotive Sheet Alloys
    Zhong, Hao
    Cao, Lingfei
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 955 - 960
  • [39] On hot deformation of aluminium-silicon powder metallurgy alloys
    Mosher, W. G. E.
    Kipouros, G. J.
    Caley, W. F.
    Donaldson, I. W.
    Bishop, D. P.
    POWDER METALLURGY, 2011, 54 (03) : 366 - 375
  • [40] Nucleation and transformation of Zr-bearing dispersoids in Al-Mg-Si 6xxx alloys
    Elasheri, Ali
    Elgallad, Emad M. M.
    Parson, Nick
    Chen, X. -Grant
    JOURNAL OF MATERIALS RESEARCH, 2023, 38 (03) : 696 - 707
12345