Preliminary study of a novel R718 compression refrigeration cycle using a three-port condensing wave rotor

Using a novel 3-port condensing wave rotor enhancing the turbocompression in a R718 refrigeration cycle, which uses only water as a refrigerant, has been introduced. The wave-rotor implementation can increase efficiency and reduce size and cost of R718 units. The condensing wave rotor employs pressurized water to pressurize, desuperheat, and condense the refrigerant vapor-all in one dynamic process. The underlying phenomena of flash evaporation, shock wave compression, desuperheating, and condensation inside the wave rotor channels are described in a wave and phase-change diagram. The thermodynamic process is shown in pressure-enthalpy and temperature-entropy diagrams. A computer program based on a thermodynamic model was generated to evaluate the performance of R718 baseline and wave-rotor-enhanced cycles. The effect of some key parameters on the performance enhancement is demonstrated as an aid for optimization. A performance map summarizes the findings. It shows optimum wave rotor pressure ratio and maximum relative performance improvement of R718 cycles by using the 3-port condensing wave rotor.