Development of rotational plasticity during deformation of Fe-1.5 wt% Si alloy

被引：3

作者：

Gernov, SA ^{[1
]}

Hamana, D

Dvorovienko, NA

Golayev, VI

Tchmutov, VM

机构：

[1] Kharkov State Univ, Dept Solid State Phys, UA-310077 Kharkov, Ukraine

[2] Univ Constantine, Res Unit Mat Phys & Applicat, Constantine, Algeria

来源：

PHILOSOPHICAL MAGAZINE LETTERS | 1998年 / 78卷 / 03期

关键词：

D O I：

10.1080/095008398177922

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The study of deformed Fe-1.5 wt% Si alloy, using mainly X-ray diffractometry methods, shows different stages in the development of plasticity, each of which has its own driving forces and structural elements. These stages are represented by conventional dislocation mechanisms or translational displacements and by disclination mechanisms or rotational displacements. After rolling, there are fewer opportunities for the rotational mechanism of plastic deformation than after a tensile test. This is due essentially to a more regular development of plastic flow in the material.

引用

页码：185 / 191

页数：7

共 50 条

[1] Cu precipitation in a prestrained Fe-1.5 wt pct Cu alloy during isothermal aging
C. Zhang
M. Enomoto
T. Yamashita
N. Sano
Metallurgical and Materials Transactions A, 2004, 35 : 1263 - 1272
[2] Cu precipitation in a prestrained Fe-1.5 Wt Pct Cu alloy during isothermal aging
Zhang, C
Enomoto, M
Yamashita, T
Sano, N
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (04): : 1263 - 1272
[3] The microstructure of the diffusion zone of a gaseously nitrided Fe-1.5 wt-% Cr-1.5 wt-%Al alloy
Clauss, A. R.
Bischoff, E.
Schacherl, R. E.
Mittemeijer, E. J.
MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (03) : 297 - 308
[4] CHARACTERIZATION OF WEAR MECHANISMS IN SINTERED Fe-1.5 Wt % Cu ALLOYS
Mazahery, A.
Shabani, M. O.
ARCHIVES OF METALLURGY AND MATERIALS, 2012, 57 (01) : 93 - 103
[5] TEMPERING OF MARTENSITE IN AN FE-1.5 PCT N ALLOY
GARWOOD, RD
THOMAS, G
METALLURGICAL TRANSACTIONS, 1973, 4 (01): : 225 - 236
[6] Magnetic softness of Fe-1.5 wt.%Si single-crystal films deposited on GaAs(111)
Hosono, Akihiko
Shimada, Yutaka
Japanese Journal of Applied Physics, Part 2: Letters, 1991, 30 (7 A):
[7] Coarsening kinetics of Cu particles in an Fe-1.5 % Cu alloy
Monzen, R
Takada, K
Matsuda, K
ZEITSCHRIFT FUR METALLKUNDE, 2003, 94 (11): : 1241 - 1246
[8] MAGNETIC SOFTNESS OF FE-1.5 WT-PERCENT-SI SINGLE-CRYSTAL FILMS DEPOSITED ON GAAS(111)
HOSONO, A
SHIMADA, Y
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1991, 30 (7A): : L1169 - L1171
[9] Precipitation of Cu particles during low temperature aging in an Fe-1.5 mass%Cu alloy
Yamashita, T
Sano, N
Chi, Z
Enomoto, M
Shirai, Y
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2004, 68 (12) : 1020 - 1025
[10] Disordering induced work softening of Fe-6.5 wt%Si alloy during warm deformation
Li, Hui
Liang, Y. F.
Yang, W.
Ye, F.
Lin, J. P.
Xie, J. X.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 628 : 262 - 268

← 1 2 3 4 5 →