Transformation of Cutting Burr/Fracture in High-Speed Machining Al Alloy

被引：1
|
作者：
Shen, Q. X. [1 ]
Wang, G. C. [1 ]
Zhu, Y. M. [1 ]
Qu, H. J. [1 ]
机构：
[1] Jiangsu Univ, Sch Mech Engn, Zhenjiang 212013, Peoples R China
来源：
SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING | 2008年 / 53-54卷
关键词：
High-speed machining (HSM); Cutting burr/fracture; Limit transformation; Finite element method; ABAQUS;
D O I：
10.4028/www.scientific.net/AMR.53-54.101
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The metal cutting burr is one of the factors that influence the edge quality and performance of precision parts. A finite element model has been established to investigate the mechanism of burr formation and limit transformation in high-speed machining 2024Aluminum alloy. The burr/fracture formation process is simulated with elastic-plastic nonlinear element method based on ABAQUS. This paper has investigated the mechanism of burr/fracture formation and the limit transformation condition of cutting-direction burrs and fractures in high-speed machining and the limit transformation condition change with the cutting condition,which lay scientific basis of further research on cutting burrs formation and its minimization and deburring technology.
引用
收藏
页码：101 / 107
页数：7
相关论文
共 50 条
  • [1] HIGH-SPEED MACHINING BY CUTTING METHODS
    MILBERG, J
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1983, 73 (01): : 5 - 10
  • [2] ESTIMATION OF CUTTING TEMPERATURE IN HIGH-SPEED MACHINING
    LIN, JM
    LEE, SL
    WENG, CI
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1992, 114 (03): : 289 - 296
  • [3] Analysis and optimization of cutting parameters under high-speed machining of Ti-6Al-4V alloy
    Khare, Sanchit Kumar
    Phull, Gurpreet Singh
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 4058 - 4064
  • [4] Research Progress of Noise in High-Speed Cutting Machining
    Wei, Weihua
    Shang, Yunyue
    Peng, You
    Cong, Rui
    SENSORS, 2022, 22 (10)
  • [5] HIGH-SPEED MACHINING OF ALLOY ROAD WHEELS
    KELLOCK, BC
    MACHINERY AND PRODUCTION ENGINEERING, 1975, 126 (3253): : 330 - 337
  • [6] Modeling the physics of metal cutting in high-speed machining
    Sandstrom, DR
    Hodowany, JN
    MACHINING SCIENCE AND TECHNOLOGY, 1998, 2 (02) : 343 - 353
  • [7] Increasing of tool resistance to high-speed machining by cutting
    Chernobay Sergey P.
    广东有色金属学报, 2005, (Z1) : 638 - 638
  • [8] The assessment of cutting temperature measurements in high-speed machining
    Wan, Y
    Tang, ZT
    Liu, ZQ
    Ai, X
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 162 - 166
  • [9] Formation and Control of the Cutting Vibration in High-Speed Machining
    Chen, Jian
    Song, Zhipeng
    Wang, Guicheng
    Shen, Chungen
    HIGH SPEED MACHINING V, 2012, 723 : 62 - 66
  • [10] Chip formation and cutting forces in high-speed machining of a nickel-based super alloy
    Spur, G
    Uhlmann, E
    Ederer, G
    ADVANCES IN MANUFACTURING TECHNOLOGY - XIV, 2000, : 363 - 367
12345