3D carbon aerogel-supported PtNi intermetallic nanoparticles with high metal loading as a durable oxygen reduction electrocatalyst

Highly active and cost-effective oxygen reduction reaction (ORR) catalysts that have high metal loading and enhanced durability are desirable for the practical application in direct methanol fuel cells. Here, the preparation of a three dimensional (3D) carbon-based aerogel (CA) composed of graphene and multi-walled carbon nanotubes is reported and used as a support for an ordered PtNi intermetallic catalyst (O-PtNi/CA) with a metal loading of 80 wt %. X-ray diffraction and transmission electron microscopic measurements confirm the formation of highly dispersed ordered PtNi intermetallic nanoparticles with a mean particle size of ca. 15.0 +/- 1.0 nm. The as-prepared catalyst exhibits enhanced activity and durability for the ORR when compared to the Pt/C catalyst from BASF. The mass and specific activities of the ORR at 0.90 V on O-PtNi/CA is ca. 1.4 and 1.8 times higher, respectively, than that using the commercial PVC catalyst. After an accelerated stress test, the mean particle size of the O-PtNi/CA catalyst nearly kept unchanged. Both the improved activity and durability of the O-Pt-Ni/CA catalyst could be ascribed to the formation of an intermetallic compound, the uniform dispersion of PtNi nanoparticles, and the 3 D structure of the support. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.