CHANGES OF SOME MECHANICAL PROPERTIES OF DIFFERENT LOW-DENSITY POLYETHYLENE (LDPE) FILMS DURING THE SERVICE LIFE

被引：5

作者：

Emekli, N. Y. ^{[1
]}

Buyuktas, K. ^{[1
]}

Bascetincelik, A. ^{[2
]}

机构：

[1] Akdeniz Univ, Dept Agr Struct & Irrigat, Fac Agr, Antalya, Turkey

[2] Cukurova Univ, Dept Agr Machinery, Fac Agr, Adana, Turkey

来源：

APPLIED ENGINEERING IN AGRICULTURE | 2017年 / 33卷 / 06期

关键词：

Aging; Impact strength; Low-density polyethylene film; Mechanical properties; Tensile strength; GREENHOUSE COVERING MATERIALS; PLASTIC FILMS; RADIOMETRIC PROPERTIES; AGRICULTURAL FILMS; TESTING METHODS; PART I; DEGRADATION; BEHAVIOR;

D O I：

10.13031/aea.12434

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

In this study, changes on some mechanical properties such as impact resistance, tensile strength, and elongation at break of the low density polyethylene (LDPE) greenhouse films produced by CO-EX technology were investigated under natural weathering conditions during their service life of 24 months. With multi-layered UV+IR+EVA and UV+IR+EVA+AF-added two different type greenhouse cover films were used as a material. For this purpose, a construction with a slope roof of 26.5 degrees was used. Initially, the impact resistances of UV+IR+EVA and UV+IR+EVA+AF films were determined as 1161.4 and 1164.1 g, respectively. But at the end of 24 months, it was determined that the impact resistance of these films reduced as 45.5% and 38.8%, respectively. In addition, tensile strength of the films decreased by 3.5% and 8.5% and the value of elongation at break decreased by 14% and 12%, respectively, at the end of 24 months period. The results showed that the physical structure of the films changed from the elastic form to the fragile form at the end of product life depending on environmental conditions and aging. This situation is very important for all manufacturers who engaged in greenhouse cultivation in Antalya where the greenhouse cultivation is common.

引用

页码：913 / 918

页数：6

共 21 条

[1]

Akkurt S., 2007, PLASTIC MAT SCI TECH

[2] Mechanical deterioration of polyethylene greenhouses covering under arid conditions [J].

Alhamdan, Abdullah M. ;

Al-Helal, Ibrahim M. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) :63-69

[3]

Alkan Z., 1977, GREENHOUSE PLANNING

[4] Degradation characterisation of agricultural low-density polyethylene films [J].

Briassoulis, D ;

Aristopoulou, A ;

Bonora, M ;

Verlodt, I .

BIOSYSTEMS ENGINEERING, 2004, 88 (02) :131-143

[5] Mechanical behaviour and properties of agricultural nets - Part I: Testing methods for agricultural nets [J].

Briassoulis, D. ;

Mistriotis, A. ;

Eleftherakis, D. .

POLYMER TESTING, 2007, 26 (06) :822-832

[6] Mechanical behaviour of biodegradable agricultural films under real field conditions [J].

Briassoulis, D .

POLYMER DEGRADATION AND STABILITY, 2006, 91 (06) :1256-1272

[7] The effects of tensile stress and the agrochemical Vapam on the ageing of low density polyethylene (LDPE) agricultural films. Part I. Mechanical behaviour [J].

Briassoulis, D .

POLYMER DEGRADATION AND STABILITY, 2005, 88 (03) :489-503

[8] Mechanical properties of covering materials for greenhouses .2. Quality assessment [J].

Briassoulis, D ;

Waaijenberg, D ;

Gratraud, J ;

vonElsner, B .

JOURNAL OF AGRICULTURAL ENGINEERING RESEARCH, 1997, 67 (03) :171-217

[9] Analysis and design of low-density polyethylene greenhouse films [J].

Briassoulis, D ;

Schettini, E .

BIOSYSTEMS ENGINEERING, 2003, 84 (03) :303-314

[10] Innovative Photoselective and Photoluminescent Plastic Films for Protected Cultivation [J].

De Salvador, F. R. ;

Mugnozza, G. Scarascia ;

Vox, G. ;

Schettini, E. ;

Mastrorilli, M. ;

Jaoude, M. Bou .

PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON HIGH TECHNOLOGY FOR GREENHOUSE SYSTEM MANAGEMENT, VOLS 1 AND 2, 2008, (801) :115-+

← 1 2 3 →