Plasma immersion ion implantation modification of surface properties of polymer material

被引：0
作者：
Husein, IF
Zhou, YZ
Qin, S
Chan, C
Kleiman, JO
Marchev, K
机构：
来源：
MATERIALS MODIFICATION AND SYNTHESIS BY ION BEAM PROCESSING | 1997年 / 438卷
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The use of plasma immersion ion implantation (PIII) as a novel method for the treatment of polymer surfaces is investigated. The effect of Pm treatment on the coefficient of friction, contact angle modification, and surface energy of silicone and EPDM (ethylene-propylene-diene monomer) rubber are investigated as a function of pulse voltage, treatment time, and gas species. Low energy (0 - 8 keV) and high dose (similar to 10(17) - 10(18) ions/cm(2)) implantation ofN(2), Ar, and CF4 is performed using an inductively coupled plasma source (ICP) at low pressure (0.2 mTorr). PIII treatment reduces the coefficient of friction (I) of silicone rubber from mu = 0.464 to the range mu = 0.176 - 0.274, and mu of EPDM rubber decreases from 0.9 to the range mu = 0.27 - 0.416 depending on processing conditions. The contact angle of water and diiodomethylene decreases after implantation and increases at higher doses for both silicone and EPDM rubber.
引用
收藏
页码：511 / 516
页数：6
相关论文
共 50 条
[31]   Modification of the Properties of Vanadium Oxide Thin Films by Plasma-Immersion Ion Implantation [J].
Burdyukh, Sergey ;
Berezina, Olga ;
Pergament, Alexander .
ADVANCES IN CONDENSED MATTER PHYSICS, 2018, 2018
[32]   Improvement on surface properties of titanium alloy by plasma immersion ion implantation technique [J].
Liu, HX ;
Tang, BY ;
Wang, LP ;
Wang, XF .
RARE METAL MATERIALS AND ENGINEERING, 2005, 34 (08) :1318-1321
[33]   Optical properties of surface modified polypropylene by plasma immersion ion implantation technique [J].
Ahmed, Sk Faruque ;
Moon, Myoung-Woon ;
Kim, Chansoo ;
Jang, Yong-Jun ;
Han, Seonghee ;
Choi, Jin-Young ;
Park, Won-Woong ;
Lee, Kwang-Ryeol .
APPLIED PHYSICS LETTERS, 2010, 97 (08)
[34]   Reactive plasma immersion ion implantation for surface passivation [J].
Yankov, R. A. ;
Shevchenko, N. ;
Rogozin, A. ;
Maitz, M. F. ;
Richter, E. ;
Moeller, W. ;
Donchev, A. ;
Schuetze, M. .
SURFACE & COATINGS TECHNOLOGY, 2007, 201 (15) :6752-6758
[35]   Modification of surface properties of Ti-16Si-4B powder alloy by plasma immersion ion implantation [J].
Fernandes, Bruno Bacci ;
Ueda, Mario ;
Mello, Carina Barros ;
Fernandes, Paulino Bacci ;
Reuther, Helfriecl ;
Ramos, Alfeu Saraiva .
INTERMETALLICS, 2011, 19 (05) :693-697
[36]   SOI material technology using plasma immersion ion implantation [J].
Lu, X ;
Iyer, SSK ;
Min, J ;
Fan, Z ;
Liu, JB ;
Chu, PK ;
Hu, C ;
Chueng, NW .
1996 IEEE INTERNATIONAL SOI CONFERENCE PROCEEDINGS, 1996, :48-49
[37]   Surface modification of L605 by oxygen plasma immersion ion implantation for biomedical applications [J].
Letícia Marin de Andrade ;
Carlo Paternoster ;
Vanessa Montaño-Machado ;
Gianni Barucca ;
Małgorzata Sikora-Jasinska ;
Ranna Tolouei ;
Stéphane Turgeon ;
Diego Mantovani .
MRS Communications, 2018, 8 :1404-1412
[38]   Determination of Ni Release in NiTi SMA with Surface Modification by Nitrogen Plasma Immersion Ion Implantation [J].
Eliene Nogueira de Camargo ;
Anderson Oliveira Lobo ;
Maria Margareth da Silva ;
Mario Ueda ;
Edivaldo Egea Garcia ;
Luc Pichon ;
Helfried Reuther ;
Jorge Otubo .
Journal of Materials Engineering and Performance, 2011, 20 :798-801
[39]   Surface modification of L605 by oxygen plasma immersion ion implantation for biomedical applications [J].
de Andrade, Leticia Marin ;
Paternoster, Carlo ;
Montano-Machado, Vanessa ;
Barucca, Gianni ;
Sikora-Jasinska, Malgorzata ;
Tolouei, Ranna ;
Turgeon, Stephane ;
Mantovani, Diego .
MRS COMMUNICATIONS, 2018, 8 (04) :1404-1412
[40]   Surface modification by nitrogen plasma immersion ion implantation on austenitic AISI 304 stainless steel [J].
Miguel Castro-Colin ;
William Durrer ;
Jorge A. López ;
Enrique Ramirez-Homs .
Journal of Iron and Steel Research International, 2016, 23 :380-384
12345