Contour error control of CNC machine tools with vibration avoidance

被引：94

作者：

Altintas, Y. ^{[1
]}

Khoshdarregi, M. R. ^{[1
]}

机构：

[1] Univ British Columbia, Dept Mech Engn, Mfg Automat Lab, Vancouver, BC V6T 1Z4, Canada

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2012年 / 61卷 / 01期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Drive; Error; Compensation; SYSTEM;

D O I：

10.1016/j.cirp.2012.03.132

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A vibration avoidance and contouring error compensation algorithm for feed drives is presented. The residual vibrations are avoided by applying input shaping filters on the reference axis commands. The input shaping filter avoids the excitation of the structural modes but at the expense of increasing tracking and contouring errors. The tracking errors are estimated from the closed loop transfer function of drives, and used to predict the contouring errors which are mapped to the each axis for pre-compensation. The integrated vibration avoidance and contouring error compensation is experimentally demonstrated to improve the damping and contouring accuracy on a two-axis table. (c) 2012 CIRP.

引用

页码：335 / 338

页数：4

共 10 条

[1] Chatter stability of metal cutting and grinding [J].

Altintas, Y ;

Weck, M .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (02) :619-642

[2] Machine tool feed drives [J].

Altintas, Y. ;

Verl, A. ;

Brecher, C. ;

Uriarte, L. ;

Pritschow, G. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (02) :779-796

[3] High speed contouring control strategy for five-axis machine tools [J].

Altintas, Y. ;

Sencer, B. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (01) :417-420

[4] Cross-coupling position command shaping control in a multi-axis motion system [J].

Chen, Chin-Sheng ;

Chen, Li-Yeh .

MECHATRONICS, 2011, 21 (03) :625-632

[5]

Dietmair A, 2009, MODERN MACHINERY SCI, V3

[6]

Do Carmo M.P., 2016, Differential Geometry of Curves and Surfaces: Revised and Updated, V2nd

[7] Virtual CNC system. Part II. High speed contouring application [J].

Erkorkmaz, Kaan ;

Yeung, Chi-Ho ;

Altintas, Yusuf .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (10) :1124-1138

[8]

Koren Y., 1991, ANN CIRP, V40, P371, DOI DOI 10.1016/S0007-8506(07)62009-5

[9] PRESHAPING COMMAND INPUTS TO REDUCE SYSTEM VIBRATION [J].

SINGER, NC ;

SEERING, WP .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1990, 112 (01) :76-82

[10] Improving repeatability of coordinate measuring machines with shaped command signals [J].

Singhose, WE ;

Seering, WP ;

Singer, NC .

PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1996, 18 (2-3) :138-146

← 1 →