A method for force analysis of the overconstrained lower mobility parallel mechanism

被引：48

作者：

Xu, Yundou ^{[1
]}

Liu, Wenlan ^{[1
]}

Yao, Jiantao ^{[1
]}

Zhao, Yongsheng ^{[1
]}

机构：

[1] Yanshan Univ, Parallel Robot & Mech Syst Lab Hebei Prov, Key Lab Adv Forging & Stamping Technol & Sci, Minist Natl Educ, Qinhuangdao 066004, Hebei, Peoples R China

来源：

MECHANISM AND MACHINE THEORY | 2015年 / 88卷

基金：

中国国家自然科学基金;

关键词：

Lower mobility parallel mechanism; Overconstraint; Force analysis; Stiffness matrix; Force simulation model; MANIPULATORS; DYNAMICS; OPTIMIZATION; SOLVABILITY;

D O I：

10.1016/j.mechmachtheory.2015.01.004

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A novel method for force analysis of the overconstrained lower mobility parallel mechanisms (LMPM) is proposed. Firstly, definitions of the constraint wrenches and overconstraint wrenches are put forward. Then, overconstrained LMPMs are classified into two classes based on characteristic of the elastic deformations generated at the end of the supporting limbs, which are limb stiffness decoupled overconstrained LMPM and limb stiffness coupled overconstrained LMPM, respectively. Corresponding to the limb stiffness decoupled and coupled overconstrained LMPMs, stiffness matrix of the supporting limb's overconstraint wrenches and constraint wrenches are introduced and defined respectively. Next, taking the link's spatial composite elastic deformations into account, the stiffness matrix of the supporting limb's overconstraint wrenches or constraint wrenches is established, and general analytical expression for the solution of each supporting limb's overconstraint wrenches or constraint wrenches is derived. Furthermore, the internal relation between the constraint wrenches and the actual joint reactions is discussed. Finally, based on Adams simulation software, a method to set up the force simulation model of the overconstrained LMPMis put forward, and the simulation results and the theoretical calculation ones are basically consistent, which effectively verifies the correctness of the proposedmethod for force analysis of the overconstrained LMPM. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：31 / 48

页数：18

共 42 条

[1]

Bennett G.T., P LONDON MATH SOC, P151

[2] Dynamic model of an overconstrained PKM with compliances: The Tripteor X7 [J].