Application of swirling flow nozzle and investigation of superheat dissipation casting for bloom continuous casing

A swirling flow nozzle (SFN) has been proposed and designed for bloom continuous casting based on the idea that the melt flow pattern in the mould region can be controlled by changing the jet direction from outlets of the submerged entry nozzle. The simulated and plant trial results show that, as compared to the conventional straight nozzle, the oversized shrinkage porosity along with centre cracking at the strand cross-section is removed, and the maximum segregation degree fluctuation range of solute element C is reduced from 0.17 to 0.05. The positive effect is attributed to the remarkable superheat dissipation effect of horizontal swirling flow generated by SFN, which is reduced by 10.6 K as compared to the normal nozzle. Moreover, the adoption of SFN can further enhance the metallurgical effect of in-mould electromagnetic stirring (M-EMS), where both better chemical homogeneity and soundness of bloom castings can be obtained by the combined adoption of SFN and M-EMS.