Design of a nonlinear energy harvester based on high static low dynamic stiffness for low frequency random vibrations

被引:43
作者
Drezet, C. [1 ,2 ]
Kacem, N. [1 ]
Bouhaddi, N. [1 ]
机构
[1] Univ Bourgogne Franche Comte, FEMTO ST Inst, CNRS UFC ENSMM UTBM, Dept Appl Mech, F-25000 Besancon, France
[2] TRAXENS, F-13013 Marseille, France
关键词
Vibration energy harvesting; High static low dynamic stiffness; Random vibrations; Electromagnetic; ELECTROMAGNETIC GENERATOR; OPTIMIZATION; SHOCK;
D O I
10.1016/j.sna.2018.09.046
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Most of the vibration sources, which could be used for energy harvesting, are vertical and very low frequency (e.g. human movement, vehicle transportation, etc...). Under those conditions and while considering the size constraints, usual vibration energy harvesters (VEHs) underperform due to the combined effect of gravity, mechanical damping and the necessity to be tuned to very low frequencies. In order to overcome these limitations, the concept of High Static Low Dynamic (HSLD) stiffness is proposed and validated for VEHs. To do so, a theoretical study is performed to optimize the electromagnetic structure and design a folded-beam suspension of the moving mass allowing a low mechanical damping. This leads to the design of an original VEH, which is experimentally characterized under harmonic and white noise excitations. Compared to the literature, it demonstrated high performances with up to 41.3 mWcm(-3) g(-2) of normalized harvested power at an operating low frequency of 5.3 Hz. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:54 / 64
页数:11
相关论文
共 43 条
  • [1] [Anonymous], 2012, ELECTROMAGNETIC VIBR
  • [2] [Anonymous], 2011, PIEZOELECTRIC ENERGY, DOI DOI 10.1002/9781119991151.APP1
  • [3] Apo DanielJolomi., 2014, Energy Harvesting and Systems, V1, P1, DOI DOI 10.1515/EHS-2014-0002
  • [4] Barbosa R.S., 2012, Journal of Mechanical Engineering and Automation, V2, P17
  • [5] A micro electromagnetic generator for vibration energy harvesting
    Beeby, S. P.
    Torah, R. N.
    Tudor, M. J.
    Glynne-Jones, P.
    O'Donnell, T.
    Saha, C. R.
    Roy, S.
    [J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (07) : 1257 - 1265
  • [6] On the design of a high-static-low-dynamic stiffness isolator using linear mechanical springs and magnets
    Carrella, A.
    Brennan, M. J.
    Waters, T. P.
    Shin, K.
    [J]. JOURNAL OF SOUND AND VIBRATION, 2008, 315 (03) : 712 - 720
  • [7] Bistable Buckled Beam: Modeling of Actuating Force and Experimental Validations
    Cazottes, Paul
    Fernandes, Amancio
    Pouget, Joel
    Hafez, Moustapha
    [J]. JOURNAL OF MECHANICAL DESIGN, 2009, 131 (10) : 1010011 - 10100110
  • [8] Effective optimization of electromagnetic energy harvesters through direct computation of the electromagnetic coupling
    Cepnik, C.
    Radler, O.
    Rosenbaum, S.
    Stroehla, T.
    Wallrabe, U.
    [J]. SENSORS AND ACTUATORS A-PHYSICAL, 2011, 167 (02) : 416 - 421
  • [9] Design, Simulation, and Testing of Energy Harvesters With Magnetic Suspensions for the Generation of Electricity From Freight Train Vibrations
    De Pasquale, Giorgio
    Soma, Aurelio
    Zampieri, Nicolo
    [J]. JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 2012, 7 (04):
  • [10] A fast and elitist multiobjective genetic algorithm: NSGA-II
    Deb, K
    Pratap, A
    Agarwal, S
    Meyarivan, T
    [J]. IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION, 2002, 6 (02) : 182 - 197