Fabrication of hydrophobic/super-hydrophobic nanofilms on magnesium alloys by polymer plating

Hydrophobic/super-hydrophobic nanofilms with improved corrosion resistance were fabricated on the surfaces of Mg-Mn-Ce magnesium alloy by a surface modification technique, named as polymer plating, which has been developed to modify superficial characteristics of magnesium alloys with polymeric nanofilms through synthesized organic compounds of triazine dithiol containing functional groups. The nanofilms were prepared by the electrochemical and polymerization reactions during polymer plating analyzed from characteristics of Fourier transform infrared spectrophotometer, X-ray photoelectron spectroscopy and scanning electron microscopy. The fabricated nanofilms changed the surface wettability of blank magnesium alloy from hydrophilic to hydrophobic with contact angle 119.0 degrees of distilled water with lower surface free energy of 20.59 mJ/m(2) and even super-hydrophobic with contact angle 158.3 degrees with lowest surface free energy of 4.68 mJ/m(2) by different functional nanofilms on their surfaces. Alteration of wettability from hydrophilic to hydrophobic and super-hydrophobic resulted from their low surface free energy and surface morphology with micro-and nano-rough structures. The corrosion behaviors from potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) show that the super-hydrophobic nanofilm has higher corrosion resistance and stability in 0.1 mol/L NaCl solution and lower corrosion current density (I(corr)) with R(ct) increasing two orders of magnitude of 16,500 Omega center dot cm(2) compared to that obtained for blank of 485 Omega center dot cm(2). (C) 2011 Elsevier B.V. All rights reserved.