Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications

被引：94
作者：
Singh, Rupinder [1 ]
Kumar, Ranvijay [1 ]
Feo, Luciano [2 ]
Fraternali, Fernando [2 ]
机构：
[1] Guru Nanak Dev Engn Coll, Dept Prod Engn, Ludhiana, Punjab, India
[2] Univ Salerno, Dept Civil Engn, Fisciano, Italy
来源：
COMPOSITES PART B-ENGINEERING | 2016年 / 101卷
关键词：
Friction welding; ABS; Nylon6; Shore hardness; Tensile strength; Porosity; ALUMINUM-ALLOY; THERMOPLASTIC COMPOSITES; JOINTS; MICROSTRUCTURE; INTERLAYER; STRENGTH; FAILURE; HDPE; ABS;
D O I：
10.1016/j.compositesb.2016.06.082
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Friction welding is one of the established processes for joining of similar as well as dissimilar polymer/plastics and metals. In past 20 years numbers of application in different areas using this process have been highlighted, but very limited contributions have been reported on properties of friction welded joints of dissimilar polymer/plastic materials after reinforcement with metal powder. In the present work an attempt has been made to perform friction welding of dissimilar plastic based materials by controlling the melt flow index (MFI) after reinforcement with metal powders. The present studies of friction welding for dissimilar plastic were performed on Lathe by considering three input parameters (namely: rotational speed, feed rate, and time taken to perform welding). Investigations were made to check the influence of process parameters on mechanical and metallurgical properties (like: tensile strength, Shore D hardness and porosity at joint). The process parameters were optimized using Minitab software based on Taguchi L9 orthogonal array and results are supported by photomicrographs. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：77 / 86
页数：10
相关论文
共 50 条
  • [21] Development of an Artificial Neural Network Model to Predict the Tensile Strength of Friction Stir Welding of Dissimilar Materials Using Cryogenic Processes
    Cho, Mingoo
    Gim, Jinsu
    Kim, Ji Hoon
    Kang, Sungwook
    APPLIED SCIENCES-BASEL, 2024, 14 (20):
  • [22] Friction Stir Welding of Dissimilar Materials between Aluminium Alloys and Copper - An Overview
    Mubiayi, Mukuna P.
    Akinlabi, Esther T.
    WORLD CONGRESS ON ENGINEERING - WCE 2013, VOL III, 2013, : 1990 - 1996
  • [23] Dissimilar Al/steel Friction stir welding lap joints for automotive applications
    Campanella, D.
    Spena, P. Russo
    Buffa, G.
    Fratini, L.
    PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
  • [24] Numerical Simulation of the Inertia Friction Welding Process of Dissimilar Materials
    Medhat A. El-Hadek
    Metallurgical and Materials Transactions B, 2014, 45 : 2346 - 2356
  • [25] Numerical modeling and experimental investigation on plasma-assisted hybrid friction stir welding of dissimilar materials
    Yaduwanshi, D. K.
    Bag, S.
    Pal, S.
    MATERIALS & DESIGN, 2016, 92 : 166 - 183
  • [26] Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
    Alves, Eder Paduan
    Toledo, Rafael Cardoso
    Piorino Neto, Francisco
    Botter, Fabio Gabarra
    An, Chen Ying
    JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, 2019, 11
  • [27] Review on Process Parameters of Similar and Dissimilar Materials in Friction Welding
    Pilli, Neeraja
    Senapati, Ajit Kumar
    Moora, Swarna Latha
    THIRD INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS (ICMSS 2020), 2021, 2327
  • [28] Evaluation of Mechanical and Metallurgical properties of dissimilar materials by friction welding
    Shanjeevi, C.
    Kumar, Satish S.
    Sathiya, P.
    INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 : 1514 - 1523
  • [29] Microstructure characterization and properties of carbon steel to stainless steel dissimilar metal joint made by friction welding
    Ma, Hong
    Qin, Guoliang
    Geng, Peihao
    Li, Fei
    Fu, Banglong
    Meng, Xiangmeng
    MATERIALS & DESIGN, 2015, 86 : 587 - 597
  • [30] State of the art about dissimilar metal friction stir welding
    Simar, Aude
    Avettand-Fenoel, Marie-Noelle
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2017, 22 (05) : 389 - 403
12345