Wax formation study by the pyrolysis of high density polyethylene

被引：3
作者：
Luo, Cairong [1 ]
Ding, Fei [1 ]
Zhang, Hairong [1 ]
Xiong, Lian [1 ]
Guo, Haijun [1 ]
Chen, Xinde [1 ]
机构：
[1] Chinese Acad Sci, Key Lab Renewable Energy & Gas Hydrate, Guangzhou 510640, Guangdong, Peoples R China
来源：
MATERIALS PROCESSING TECHNOLOGY, PTS 1-3 | 2012年 / 418-420卷
关键词：
polyethylene; pyrolysis; polyethylene wax; drop melting point; average molecular weight; PLASTICS; DEGRADATION; WASTE;
D O I：
10.4028/www.scientific.net/AMR.418-420.1673
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Pyrolysis of high density polyethylene (HDPE) to polyethylene wax (PEW) in a 1 L continues stirred-tank reactor (CSTR) was studied at 360-420 degrees C with 5-240 min, yield of PEW was discussed and the properties such as the drop melting point and average molecular weight of wax were determined. The PEW had a melting point of 104-120 degrees C, and an average molecular weight of around 3000 with a good dispersity at 673 K.,Moreover, the composition of wax determined by fourier transform infrared spectroscopy (FT-IR) indicated that it was less branched than commercial waxes.
引用
收藏
页码：1673 / 1676
页数：4
相关论文
共 50 条
  • [1] Kinetic study of high density polyethylene (HDPE) pyrolysis
    Al-Salem, S. M.
    Lettieri, P.
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2010, 88 (12A) : 1599 - 1606
  • [2] High-Precision Monitoring of Average Molecular Weight of Polyethylene Wax from Waste High-Density Polyethylene
    Guo, Zhouchao
    Lan, Xia
    Xue, Ping
    POLYMERS, 2020, 12 (01)
  • [3] Conversion of waste polyolefins to polyethylene wax via pyrolysis
    Gaidhani, Apurv
    Mahanwar, Prakash
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (01) : 2112 - 2121
  • [4] Alternative liquid fuel from pyrolysis of polyethylene wax
    Chaiya, Chaiyan
    Pankumpet, Nattamon
    Buapibal, Butsayaporn
    Chalermsinsuwan, Benjapon
    ENERGY REPORTS, 2020, 6 : 1262 - 1267
  • [5] Pyrolysis of low-density polyethylene waste plastics using mixtures of catalysts
    Soliman, Aya
    Farag, Hassan A.
    Nassef, Ehssan
    Amer, A.
    ElTaweel, Yehia
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2020, 22 (05) : 1399 - 1406
  • [6] CO-PYROLYSIS OF HIGH-DENSITY POLYETHYLENE AND WOOD MIXTURES
    Ersen, Tuba
    Pehlivan, Dursun
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2011, 26 (03): : 607 - 612
  • [7] Pyrolysis of Low-Density Polyethylene
    Zattini, Giorgio
    Leonardi, Chiara
    Mazzocchetti, Laura
    Cavazzoni, Massimo
    Montanari, Ivan
    Tosi, Cristian
    Benelli, Tiziana
    Giorgini, Loris
    SUSTAINABLE DESIGN AND MANUFACTURING 2017, 2017, 68 : 480 - 490
  • [8] Synergetic pyrolysis of high density polyethylene and Jatropha and Karanj cakes: A thermogravimetric study
    Parekh, Dharmendra B.
    Rotliwala, Yogesh C.
    Parikh, Parimal A.
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2009, 1 (03)
  • [9] Differences in Nanoplastic Formation Behavior Between High-Density Polyethylene and Low-Density Polyethylene
    Nakatani, Hisayuki
    Yamaguchi, Teruyuki
    Asano, Mika
    Motokucho, Suguru
    Dao, Anh Thi Ngoc
    Kim, Hee-Jin
    Yagi, Mitsuharu
    Kyozuka, Yusaku
    MOLECULES, 2025, 30 (02):
  • [10] Pyrolysis of waste high density polyethylene (HDPE) and low density polyethylene (LDPE) plastics and production of epoxy composites with their pyrolysis chars
    Sogancioglu, Merve
    Yel, Esra
    Ahmetli, Gulnare
    JOURNAL OF CLEANER PRODUCTION, 2017, 165 : 369 - 381
12345