Electrically conductive adhesive and soldered joints under compression

被引:6
作者
Kim, KD [1 ]
Chung, DDL [1 ]
机构
[1] SUNY Buffalo, Composite Mat Res Lab, Buffalo, NY 14260 USA
关键词
solder; adhesive; joint; electrical resistivity; silver; epoxy;
D O I
10.1163/1568561054950988
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Compression of soldered and conductive adhesive joints resulted in both reversible and irreversible changes in the contact electrical resistivity. At a low stress (as low as 0.02 and 0.005 MPa for soldered and adhesive joints, respectively), the resistivity increased with almost complete reversibility as the compressive stress increased. At an intermediate stress (as low as 0.03 MPa) for both soldered and adhesive joints, the resistivity decreased with partial or complete reversibility as the stress increased. At a high stress (as high as 0.21 MPa) for the soldered joint only, the resistivity increased slightly with increasing stress. The resistivity of the soldered joint at no load increased irreversibly and gradually as stress cycling progressed, even at the lowest stress amplitude of 0.12 MPa. However, the resistivity of the adhesive joint at no load decreased irreversibly and gradually as stress cycling progressed, even at the lowest stress amplitude of 0.009 MPa.
引用
收藏
页码:1003 / 1023
页数:21
相关论文
共 19 条
[1]   CONSTANT STRAIN RATE TENSILE PROPERTIES OF VARIOUS LEAD BASED SOLDER ALLOYS AT 0-DEGREES-C,50-DEGREES-C, AND 100-DEGREES-C [J].
COLE, M ;
CAULFIELD, T .
SCRIPTA METALLURGICA ET MATERIALIA, 1992, 27 (07) :903-908
[2]  
Feldmann K., 1998, Surface Mount Technology, V12
[3]   DIELECTRIC-SPECTROSCOPY OF REVERSIBLY FLOCCULATED DISPERSIONS DURING FLOW [J].
GENZ, U ;
HELSEN, JA ;
MEWIS, J .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1994, 165 (01) :212-220
[4]   Aging effects on the electrical properties of silver-filled epoxy adhesives [J].
Giants, TW .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1998, 12 (06) :593-613
[5]   The interrelationships between electronically conductive adhesive formulations, substrate and filler surface properties, and joint performance. Part I: the effects of adhesive thickness [J].
Gomatam, RR ;
Sancaktar, E .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (11) :1225-1243
[6]   The interrelationships between electronically conductive adhesive formulations, substrate and filler surface properties, and joint performance. Part II: the effects of bonding pressure [J].
Gomatam, RR ;
Sancaktar, E .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (11) :1245-1261
[7]   Low cycle fatigue dwell effects and damage mechanisms [J].
Goswami, T .
INTERNATIONAL JOURNAL OF FATIGUE, 1999, 21 (01) :55-76
[8]  
Inada T., 1998, Proceedings. 4th International Symposium on Advanced Packaging Materials Processes, Properties and Interfaces (Cat. No.98EX153), P268, DOI 10.1109/ISAPM.1998.664468
[9]   Flow behavior of graphitized carbon black suspensions [J].
Ishii, C ;
Koseki, K ;
Amari, T ;
Hanzawa, Y ;
Yoshizawa, N ;
Hatori, H ;
Yamada, Y ;
Yamazaki, S .
CARBON, 2001, 39 (15) :2384-2386
[10]   Development of conducting adhesive materials for microelectronic applications [J].
Kang, SK ;
Purushothaman, S .
JOURNAL OF ELECTRONIC MATERIALS, 1999, 28 (11) :1314-1318