Thermal Properties, Fracture Toughness and Water Absorption of Epoxy-Palm Oil Blends

被引：44
|
作者：
Tan, S. G. [1 ]
Chow, W. S. [1 ]
机构：
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Nibong Tebal 14300, Pulau Pinang, Malaysia
来源：
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2010年 / 49卷 / 09期
关键词：
Epoxidized palm oil; Epoxy; Fracture toughness; Thermal properties; Water absorption; CROSS-LINK DENSITY; LATENT INITIATOR; RESINS; COATINGS;
D O I：
10.1080/03602551003682042
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Epoxidized palm oil (EPO) was blended with cycloaliphatic epoxide, epoxy novolac and diglycidyl ethers of bisphenol-A. The fracture toughness and thermal properties of epoxy/EPO blends were characterized using single-edge notched bending tests and differential scanning calorimetry. Increased EPO loading improved the fracture toughness (KIC) of the epoxy blends. The epoxy blends with higher EPO loading exhibited higher degree of conversion. The glass transition temperature (Tg) of the epoxy blends shifted to higher temperature as the increasing of DSC heating rate. Water absorption caused Tg reduction of epoxy blends but it was determined that the water molecules absorbed were totally reversible.
引用
收藏
页码：900 / 907
页数：8
相关论文
共 50 条
  • [31] Thermal, mechanical, and morphological properties of oil palm cellulose nanofibril reinforced green epoxy nanocomposites
    Yusuf, J.
    Sapuan, S. M.
    Rashid, Umer
    Ilyas, R. A.
    Hassan, M. R.
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2024, 278
  • [32] Improving the fracture toughness and the cyclic-fatigue resistance of epoxy-polymer blends
    Kinloch, A. J.
    Lee, S. H.
    Taylor, A. C.
    POLYMER, 2014, 55 (24) : 6325 - 6334
  • [33] Thermal properties and fracture toughness of epoxy resins cured by phosphonium and pyrazinium salts as latent cationic initiators
    Park, SJ
    Heo, GY
    Suh, DH
    JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 2003, 41 (15) : 2393 - 2403
  • [34] The effect of water absorption on the dielectric properties of epoxy nanocomposites
    Zou, Chen
    Fothergill, J. C.
    Rowe, S. W.
    IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2008, 15 (01) : 106 - 117
  • [35] Biobased Epoxy Blends from Epoxidized Castor Oil: Effect on Mechanical, Thermal, and Morphological Properties
    Sudha, G. S.
    Kalita, Hemjyoti
    Mohanty, Smita
    Nayak, Sanjay Kumar
    MACROMOLECULAR RESEARCH, 2017, 25 (05) : 420 - 430
  • [36] Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content
    Domun N.
    Hadavinia H.
    Zhang T.
    Liaghat G.
    Vahid S.
    Spacie C.
    Paton K.R.
    Sainsbury T.
    Hadavinia, Homayoun (h.hadavinia@kingston.ac.uk), 1600, Bellwether Publishing, Ltd. (03): : 85 - 96
  • [37] Thermal properties, curing characteristics and water absorption of soybean oil-based thermoset
    Tan, S. G.
    Chow, W. S.
    EXPRESS POLYMER LETTERS, 2011, 5 (06): : 480 - 492
  • [38] Epoxy resins modified with palm oil derivatives - preparation and properties
    Czub, Piotr
    Franek, Ilona
    POLIMERY, 2013, 58 (02) : 135 - 139
  • [39] Fracture toughness enhancement of thermoplastic/epoxy blends by the plastic yield of toughening agents: A multiscale analysis
    Shin, Hyunseong
    Kim, Byungjo
    Han, Jin-Gyu
    Lee, Man Young
    Park, Jong Kyoo
    Cho, Maenghyo
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 145 : 173 - 180
  • [40] Effect of CuO nanoparticle on mechanical and thermal properties of palm oil based alkyd/epoxy resin blend
    Ong, Huei Ruey
    Khan, Md. Maksudur Rahman
    Ramli, Ridzuan
    Yunus, Rosh Mohd
    INTERNATIONAL SYMPOSIUM ON APPLIED CHEMISTRY 2015, 2015, 16 : 623 - 631
12345