Application of emergency and standby generation for distributed generation: Part 1 - Concepts and hypotheses

被引：9

作者：

Daley, JM ^{[1
]}

Siciliano, RL ^{[1
]}

机构：

[1] ASCO Power Technol, Florham Pk, NJ 07932 USA

来源：

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS | 2003年 / 39卷 / 04期

关键词：

distributed generation; grid connected; interconnect;

D O I：

10.1109/TIA.2003.813742

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Experience h shown that the demand for electricity imposes excessive peaks for short periods of time. On a yearly basis, these "needle peaks" exist for less than 200 h cumulatively. However, meeting them has produced excessively high costs of electric energy or rolling blackouts when the additional energy was not available. A viable alternative to this excessive cost or blackout is the use of installed emergency and standby capacity for these short intervals of. time. To meet the challenges of orchestrating a safe and acceptable interface of the varied power sources, utility companies And state regulators are struggling with the development of suitable interconnect requirements. While there are different strategies for bringing this installed base into service during such periods, this discussion centers on those issues concerned with the parallel operation and interconnection of emergency and standby synchronous generation resources With the electric power system.

引用

页码：1214 / 1225

页数：12