A sol-gel method to synthesize indium tin oxide nanoparticles

被引：18

作者：

Li, Xiuhua ^{[1
]}

Xu, Xiujuan ^{[1
]}

Yin, Xin ^{[1
]}

Li, Chunzhong ^{[2
]}

Zhang, Jianrong ^{[1
]}

机构：

[1] E China Univ Sci & Technol, Minist Educ, Key Lab Adv Mat, Dept Chem, Shanghai 200237, Peoples R China

[2] E China Univ Sci & Technol, Minist Educ, Key Lab Ultrafine Mat, Shanghai 200237, Peoples R China

来源：

PARTICUOLOGY | 2011年 / 9卷 / 05期

基金：

中国国家自然科学基金;

关键词：

Oxide materials; Ceramics; Sintering; Indium tin oxide; CERAMICS; POWDERS; PARTICLES; AIR;

D O I：

10.1016/j.partic.2011.03.013

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Transparent conductive indium tin oxide (ITO) nanoparticles were synthesized by a novel sal-gel method. Granulated indium and tin were dissolved in HNO(3) and partially complexed with citric acid. A sol-gel process was induced when tertiary butyl alcohol was added dropwise to the above solution. ITO nanoparticles with an average crystallite size of 18.5 nm and surface area of 32.6 m(2)/g were obtained after the gel was heat-treated at 700 degrees C. The ITO nanoparticles showed good sinterability, the starting sintering temperature decreased sharply to 900 degrees C, and the 1400 degrees C sintered pellet had a density of 98.1% of theoretical density (TD). (C) 2011 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

引用

页码：471 / 474

页数：4

共 50 条

[11] Synthesis and Dispersion Stabilization of Indium Tin Oxide Nanopowders by Coprecipitation and Sol-Gel Method for Transparent and Conductive Films
Cho, Young-Sang
Hong, Jeong-Jin
Kim, Young Kuk
Chung, Kook Chae
Choi, Chul Jin
KOREAN JOURNAL OF METALS AND MATERIALS, 2010, 48 (09): : 831 - 841
[12] Synthesis of fluorine doped tin oxide nanoparticles by sol-gel technique and their characterization
Senthilkumar, V.
Vickraman, P.
Ravikumar, R.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2010, 53 (02) : 316 - 321
[13] Preparation and properties of transparent conductive indium-tin-oxide/polyimide substrates via a sol-gel process
Li, Tung-Lin
Hsu, Steve Lien-Chung
THIN SOLID FILMS, 2010, 518 (23) : 6761 - 6766
[14] Synthesis of indium tin oxide (ITO) and fluorine-doped tin oxide (FTO) nano-powder by sol-gel combustion hybrid method
Han, Chi-Hwan
Han, Sang-Do
Gwak, Jihye
Khatkar, S. P.
MATERIALS LETTERS, 2007, 61 (8-9) : 1701 - 1703
[15] Properties of high-porosity sol-gel derived indium-tin oxide films
Stoica, TF
Gartner, M
Stoica, T
Losurdo, M
Teodorescu, VS
Blanchin, MG
Zaharescu, M
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2005, 7 (05): : 2353 - 2358
[16] Fabrication of indium tin oxide nanocoatings on ZnS phosphor powders via a sol-gel route
Yuan, J.
Ren, L.
MICRO & NANO LETTERS, 2010, 5 (01) : 53 - 57
[17] Eu-doped indium tin oxide thin films fabricated by sol-gel technique
Kim, Jung Kyun
Choi, Yong Gyu
THIN SOLID FILMS, 2009, 517 (17) : 5084 - 5086
[18] A novel solvothermal method to synthesize one-dimensional chains of indium tin oxide nanoparticles
Zhang, Jianrong
Gao, Lian
Chen, Minghai
MATERIALS LETTERS, 2007, 61 (13) : 2671 - 2674
[19] Eco-friendly method of fabricating indium-tin-oxide thin films using pure aqueous sol-gel
Misra, Mirnmoy
Hwang, Deuk-Kyu
Kim, Yoon Cheol
Myoung, Jae-Min
Lee, Tae Il
CERAMICS INTERNATIONAL, 2018, 44 (03) : 2927 - 2933
[20] A facile sol-gel approach to synthesize KNN nanoparticles at low temperature
Khorrami, Gh. H.
Kompany, A.
Zak, A. Khorsand
MATERIALS LETTERS, 2013, 110 : 172 - 175

← 1 2 3 4 5 →