Removal effect and mechanism of amphiphilic chitosan modified microbubbles on microcystis aeruginosa

Algal blooms in lake and reservoir water lead to water quality problems, including water odors, algal toxins, and disinfection byproducts. A novel dissolved air flotation process that incorporates positively charged bubbles (PosiDAF) can effectively remove algae in lakes and reservoirs. Chitosan, as a modified bubble agent in the PosiDAF process, has attracted extensive attention due to its natural nontoxicity and good flocculation proper-ties. In this paper, three types of amphiphilic chitosan with different lengths of carbon chains were prepared via amphiphilic modification and were used as bubble modifiers to remove microcystis aeruginosa in the PosiDAF process. The effects of algae removal under different dosage of modifiers were compared, and the role of algal organic matter was investigated. Results showed that the water solubility of chitosan was markedly enhanced after amphiphilic modification, while thermal stability were decreased. When using butyl-N-2 hydroxypropyl trimethyl chitosan ammonium chloride (C4-HTCC), the effect of modified air flotation was the best, and the removal ratio of algae was 93.47% when the C4-HTCC dosage was 1.0 mg/L. The presence of AOM enhanced the overall effect of algae removal, and electrostatic attraction was the primary adhesion mechanism of the microbubble-amphiphilic chitosan-algal organic matter-algal cell system. In addition, adsorption bridging and net trapping also have positive effects on algae removal.